Premiere Firearms Auction

Estimate: $1400 - 2250 A) Manufactured in the 1870s with total production estimated at only 1,000. Blade and notch sights, with the two line addres

Estimate: $3000 - 4500 The 4 1/4 inch blade is mounted on the underside of the pistol between and below the barrels. The side by side smooth bore b

Estimate: $2250 - 3250 The German silver barrel is marked "UNWIN & RODGERS/PATENTED SHEFFIELD" on the left side and the right side ...

Estimate: $2250 - 3500 This pistol has a 3 inch blade that is mounted on the right side. The spring blade is released by pulling the trigger. To re

Estimate: $2250 - 3500 The brass barrel is script marked "J. Cernea" on the top flat at the breech. The pistol has a 2 inch folding cli...

Estimate: $1800 - 2750 Also known as the 3 inch Barrel Knuckle Duster, this model was manufactured in 1875 with an estimated total production of on

Estimate: $1800 - 2750 This is one of an estimated 2,900 brass frame models manufactured from 1870 to 1882. The left side of the top strap is marke

Estimate: $1600 - 2500 This is one of an estimated 170 iron frame models that were manufactured towards the end of production, all in the 17,000 se

Estimate: $2750 - 4250 Manufactured in 1883 and also known as the "Protector", only about 360 were manufactured, falling in the serial ...

Estimate: $1400 - 2250 These rare iron frame Knuckle-Dusters were manufactured toward the end of production, circa 1881-82 in the serial number ran

Estimate: $4500 - 6000 Also known as the Parrot Beak, this deringer was manufactured from 1911 to 1915 with less than 1,400 produced. It features a

Estimate: $3250 - 4500 Manufactured between 1901 and 1915, with a total production of only several thousand of these truly unique pistols. Several

Estimate: $1300 - 1800 Manufactured circa late 1860s with a total quantity estimated at 800. These pepperboxes were manufactured by Bacon Manufactu

Estimate: $1800 - 2750 This is an example of one of the estimated 1,000 Bacon Arms pepperbox revolvers manufactured in the late 1860s. The 6-shot b

Estimate: $3500 - 5500 The top strap is marked "GEM" and the lower left barrel flat is marked "PAT DEC. 10, 78". The frame si...

Estimate: $1200 - 1600 Manufactured between 1871 and 1879. This revolver is a Model No. 1 with a total production of approximately 3,500. Marked ...

Estimate: $5500 - 8500 Manufactured by Sharps from 1859 to 1874, this particular pistol is a Model 1A that has factory engraving. It has a straight

Estimate: $1100 - 1600 Manufactured in Belgium, circa 1865-70, under a license from Christian Sharps. The barrels are marked on the muzzle end with

Estimate: $2000 - 3000 A) The left side of the frame is stamped "PATENT IN WIEN". Iron barrel cluster and brass frame. Fitted with chec...

Estimate: $1600 - 2500 This is an example of a Biedermann pistol. Biedermann worked in Vienna from 1865 to 1880. The top barrel cluster rib is mark

Estimate: $1100 - 1600 Manufactured from 1864 to 1869, this is a Fourth Model with the barrel release spring not visible. The left side plate is ma

Estimate: $1000 - 1500 A) Manufactured by Sharps & Hankins, Philadelphia circa 1859-74, nickel plate finish with birds head grip frame fitted...

Estimate: $1400 - 2250 Produced between 1864 and 1869 by Merrill Patent Firearms Company, using Eben T. Starr's patent. Third model, consigno...

Estimate: $3000 - 5000 This is one of an estimated 3,000 palm pistols manufactured from 1891 to 1892. Actual production was by James Duckworth of S

Estimate: $950 - 1600 A) Manufactured from 1865 to 1870. Standard Brooklyn barrel address and floral engraving with "CE 77" marked on l...

Estimate: $1600 - 2500 This is one of an estimated 2,900 brass frame models manufactured from 1870 to 1882. The left side of the top strap is mark

Estimate: $1200 - 1800 The top of the barrel is marked "GAULOIS", with the crossed cannons, and arrow logo. There is a bead front sight...

Estimate: $1100 - 1600 Manufactured circa 1880s with total quantity estimated at several hundred. This revolver features a .22 caliber, eight shot

Estimate: $3250 - 5500 A) Type II manufactured beginning in 1888 and ending in 1911. The top of the barrel rib is marked "REMINGTON ARMS Co....

Estimate: $1800 - 2500 This rare derringer was the first Remington handgun chambered for metallic cartridge and was produced in 1861 and 1862 with

Estimate: $4500 - 7000 This pistol was manufactured between 1863 and 1888. There is extensive floral scroll acid etched factory engraving on the 5

Estimate: $950 - 1400 Manufactured from 1867 to 1888. The top of the barrel has the two line address/Elliot patent date marking. The barrel is numb

Estimate: $1000 - 1500 Manufactured from 1871 to 1888 this example is unembellished. Note that plain examples of this type of pistol are less encou

Estimate: $15000 - 25000 This is an example of an original scarce U.S. Model 1811 flintlock pistol that was manufactured by Simeon North of Berlin,

Estimate: $8500 - 16000 The Model 1805 was manufactured circa 1806 to 1808 with a total production of about 4,096 pistols and only approximately 2,

Estimate: $11000 - 16000 The Model 1805 was manufactured circa 1806 to 1808 with a total production of about 4,096 pistols and approximately 2,580

Estimate: $4500 - 6500 Model 1836 flintlock pistol manufactured in 1842 by Robert Johnson of Middletown, Connecticut. The pistol barrel and furnitu

Estimate: $11000 - 16000 The lock is marked "VIRGINIA/MANUFACTORY(faint)" ahead of the hammer and "RICHMOND/1806" at the rear...

Estimate: $3000 - 5000 The Palmetto Armory manufactured 2000 Model 1842 Pistols solely for the South Carolina Militia in 1852-53. The Palmetto Armo

Estimate: $5500 - 7000 This is an example of a rare Variant Eagle marking U.S. Model 1836 flintlock pistol. The lock is marked only with an awkward

Estimate: $3750 - 5000 Brass blade front and groove rear sights, with the upper left side of the barrel marked "US./JH/P", "B"...

Estimate: $2500 - 3750 Model 1805 Flintlock Pistol manufactured at the U.S. Armory at Harpers Ferry, Virginia, in 1807. The Model 1805 Pistol was

Estimate: $1400 - 2250 Manufactured by W.L. Evans of Valley Forge, Pennsylvania. This pistol is one of the less than 1,000 manufactured by Evans in

Estimate: $1200 - 1700 U.S. Model 1819 Flintlock Pistol manufactured by Simeon North in Middletown, Connecticut, in 1821. Simeon North manufactured

Estimate: $950 - 1600 This is an example of an original Simeon North Model 1816 flintlock pistol manufactured from 1817 to 1820 with a total produc

Estimate: $850 - 1400 Originally manufactured by Asa Waters of Millbury, Massachusetts, this piece was originally manufactured as a percussion piec

Estimate: $5000 - 7000 U.S. Model 1805 Flintlock Pistol manufactured at the U.S. Armory at Harpers Ferry, Virginia, in 1807. The Model 1805 Pistol

Estimate: $1800 - 2750 Manufactured from 1817 to 1820 with a total production of about 19,374. The lock plate is marked with the later type marking

Estimate: $2500 - 3750 This is exceptional example of an unissued Model 1836 Flintlock Pistol manufactured in 1842 by Robert Johnson of Middletown,

Estimate: $1600 - 2250 This is an example of a Variant eagle marking 1836 flintlock pistol. The lock is marked only with an awkward eagle motif wit

Estimate: $3000 - 5000 Ordered in 1808, the Simeon North Contract Pistols were delivered over the course of 2 years, and would be the main sidearm

Estimate: $1400 - 2250 Manufactured from 1817 to 1820 with a total production of about 19,374. The lock plate is marked with the later type marking

Estimate: $1000 - 1500 This is an example of a U.S. contract Model 1842 percussion pistol that was manufactured by Henry Aston of Middletown, Conne

Estimate: $1200 - 1700 Manufactured from 1836 to 1844 with a total production of about 41,000. The lock is marked eagle head over "A. WATER...

Estimate: $850 - 1300 Manufactured in 1842 by Robert Johnson of Middletown, Connecticut. Robert Johnson manufactured an estimated 18,000 Model 1836

Estimate: $2250 - 3500 The Model 1805 was manufactured circa 1806 to 1808 with a total production of about 4,096 pistols and only approximately 1,2

Estimate: $1600 - 2500 This is an example of one of only 3,000 flintlock pistols manufactured by Simeon North for the U.S. Navy between 1826 and 18

Estimate: $1500 - 2250 Manufactured by Simeon North of Middletown, Connecticut between 1819 and 1823. The Model 1819 Pistol features a unique, slid

Estimate: $1400 - 2250 Manufactured from 1836 to 1844 with a total production of about 41,000 and reportedly 3,000 with 1844 dated locks. The lock

Estimate: $2250 - 3500 This rifle has a Model 1803 pattern stock, barrel and brass mountings with the lock marked "HARPERS/FERRY/1818" ...

Estimate: $2500 - 3750 Manufactured by Rudolph and Charles Leonard of Canton, Massachusetts between 1808 and 1814, this is one of the approximately

Estimate: $1600 - 2500 This is a standard Model 1816 Type II Musket. "SPRING FIELD/1833" marked behind the hammer and eagle shield over...

Estimate: $1200 - 1800 Blade front and notch rear sights, properly offset to the left, with the breechblock marked "J.H. HALL/H. FERRY/ US/1...

Estimate: $1200 - 1700 This is an example of a U.S. Model 1816 Flintlock Musket that was manufactured by M.T. Wickham of Philadelphia c. 1833. The

Estimate: $850 - 1200 Dated 1857 on barrel tang and lock plate, tang also has a double stamped "2", with standard Remington lock plate ...

Estimate: $7500 - 9000 The Hall Rifle is a significant U.S. military firearm. The Model 1819 Rifle was the first breech loading military arm produc

Estimate: $8500 - 14000 Rare example of a large size percussion cutlass pistol that was manufactured by Henry Morrill, Silas Mosman and Charles Bla

Estimate: $5500 - 8500 Model 1855 Percussion Pistol-Carbine manufactured by the Springfield Armory in 1855. The Springfield Armory manufactured 4,0

Estimate: $5500 - 8000 This exceptional U.S. Model 1842 Percussion Pistol was manufactured by Henry Aston of Middletown, Connecticut, in 1850. Henr

Estimate: $5500 - 8500 Manufactured circa 1855-56 with an estimated total quantity of only about 1,020. The lock is marked "SPRING/FIELD/185...

Estimate: $2250 - 3500 This is a nice example of a scarce and desirable Jenks carbine with the Maynard tape primer mechanism manufactured by E. Rem

Estimate: $2000 - 3000 These Cadet Muskets were manufactured from 1851-1853 and were almost identical to the Model 1841 except for they utilized th

Estimate: $2000 - 3000 Manufactured in 1845 by N.P. Ames of Springfield, Massachusetts from a total production of approximately 4,250. The vast maj

Estimate: $2000 - 3000 Manufactured by Robbins & Lawrence from 1848 to 1853 in Windsor, VT and also known as the "Mississippi Rifle"...

Estimate: $1100 - 1600 Federal Period Artillery Officer's saber with Ketland style cast Eagle head pommel, beaded stirrup-shaped knuckle bow,...

Estimate: $1400 - 2250 Pattern 1839 Light Artillery Saber Belt with Pattern 1839 Artillery Belt Plate. This belt was the standard saber belt for mo

Estimate: $2000 - 3000 31 inch double fuller blade, with no visible makers mark and an etched "U.S." and engraved "UNION" pan...

Estimate: $1400 - 1800 Militia Staff officer's sword with Eagle pommel and brass scabbard c.1840-1860. The sword has a straight 27 inch doubl...

Estimate: $1800 - 2500 High quality militia staff officer's sword c. 1820-1846. The sword has a 31 1/2 inch straight double-edged blade with ...

Estimate: $1000 - 1500 31 1/2 inch straight single fuller sword, with etched patriotic and martial designs on each side. Silver finished hilt, with

Estimate: $22500 - 35000 This is an extraordinary example of a U.S. contract Model 1841 rifle that was manufactured by Eli Whitney at the Whitneyvi

Estimate: $10000 - 20000 Rare example of the 1000 knives purchased by the Ordnance Department from the Ames Manufacturing Co. in 1849 for issue to

Estimate: $850 - 1400 1) U.S. 1840 Pattern Heavy Cavalry Sword with Sheath. 35 1/2 inch single fuller blade, with an oval "F.H." stamp ...

Estimate: $950 - 1400 White buff leather Dragoon Saber Belt with Pattern 1839 Enlisted Dragoon or Rifleman Belt Plate and both saber straps. This w

Estimate: $1400 - 2250 American officer's eagle pommel sword c. 1815-1840. The sword has a cast eagle head pommel, cast knuckle bow with foli...

Estimate: $850 - 1300 Eagle pommel militia officer's sword with brass scabbard c. 1840-1860. The sword has a 30 1/2 inch straight double edge...

Estimate: $1000 - 1500 30 1/4 inch single fuller blade, with niter blue panels on each side and gold accented engraving, including patriotic design

Estimate: $850 - 1200 32 inch double fuller blade, with the Clauberg logo on the left ricasso and etched decoration on each side of the blade. Nick

Estimate: $1600 - 2500 Model 1855 Percussion Pistol Carbine manufactured by the Springfield Armory in 1856. This unique weapon has a Maynard tape-

Estimate: $950 - 1600 Manufactured by Simeon North of Middletown, Connecticut, in 1827. North manufactured a total of 3,000 of these pistols betwee

Estimate: $1200 - 1700 A) This is an example of a Model 1836 flintlock pistol manufactured by Robert Johnson of Middletown, Connecticut, in 1843 an

Estimate: $900 - 1300 U.S. Model 1842 Percussion Pistol manufactured by Henry Aston of Middletown, Connecticut, in 1847. Henry Aston manufactured a

Estimate: $1100 - 1600 A) Marked "US/I.N. JOHNSON" on the lock plate in front of the hammer, "MIDDTN/CONN/1853" vertically at...

Estimate: $110000 - 160000 This is a rare example of a U.S. Colt Walker Model percussion revolver that was manufactured in 1847 as part of a 1,000

Estimate: $20000 - 40000 This is an example of one of approximately 1,000 First Model Sporting rifles manufactured from 1856 to 1859. Its estimated

Estimate: $55000 - 90000 This historic and rare Colt Model 1851 revolver was presented to Commodore Cornelius Vanderbilt by Colonel Samuel Colt an

Estimate: $11000 - 16000 Manufactured circa 1872-1873, this was one of approximately 7,000 made and was the direct predecessor to the famous Colt S

Estimate: $8000 - 11000 Manufactured in 1861, this revolver is one of only about 4,000 Colt Model 1860 Army Revolvers manufactured with the full fl

Estimate: $5000 - 7000 Manufactured in 1863 with the four screw frame cut for a shoulder stock. The revolver has the capping groove with the one li

Estimate: $6500 - 9500 This scarce Upper Canada Militia marked Colt Model 1851 London Navy Revolver that was manufactured in 1855 and is one of app