Premiere Collector's Firearms Auction

This is an example of a Schnider 1808 Contract Flintlock pistol with Massachusetts "M.S." acceptance mark stamped on the left stock flat. ...

The product of an order issued in November of 1805 by Henry Dearborn, American Secretary of war to Joseph Perkins, Superintendant and Master Armorer o

Brass barreled flintlock pistol made by "T/BOLTON & CO" and stamped with the "IP" final inspection mark of Joseph Perkins, M...

Brass blade sight, with "US/ GW/ P" on the upper left side of the barrel and "1850" on the tang. The beveled lock plate is marke...

Produced at North's armory in Berlin, Connecticut, this is one of approximately 606 Model 1811 pistols produced without the double strap iron ba...

Produced by Robert Johnson of Middletown, Connecticut. Brass blade front and groove rear sights, with "U.S./ JH/ P" on the upper left flat...

This is a Second Type Model 1795 Flintlock Musket as manufactured in 1809 with the detachable iron flash pan. The lock plate is dated "1809&quo...

Type III. Brass blade front sight and bayonet lug on the barrel, with "V/ P/ eagle head" on the left side near the breech. Marked "HA...

The U.S. Model 1795 Springfield Musket was manufactured 1813. The lock plate is marked with the script "US" over a downward arched "S...

This is an example of a Third Type Model 1816 flintlock musket from a contract for 21,560 muskets manufactured by Asa Waters of Millbury, Massachusett

This is an standard Model 1816, Type I, musket. It has the "eagle/US" mark in front of the hammer and "SPRING / FIELD / 1819" ve...

The lightly engraved lock is marked "J. J. HENRY / BOULTON" and the top barrel flat is marked in script "A. Albright" flanked by...

The top of the rib barrel is marked "JOHN CHILDS PATENT ELEVATED RIFLE TUBULAR RIB". The left side rear of the rib barrel is marked with t...

Styled directly after the French Model 1763 Charleville pattern, this is one of 20,000 muskets made by approximately 18 makers for Pennsylvania state

18th Century "Long Fowler' flintlock musket. The musket has a pin-fastened, part round/part octagon barrel with brass blade front sight. Th...

Dated 1805, the exact purpose of this mechanism is unknown, possibly a gun lock made for a cannon or an experimental lock. Measuring 8" overall...

A) Manufactured circa mid-1840s to 1849 with total quantity unknown. This pistol represents an enigma for today's collectors. This pistol was no...

A) Produced between 1836 and 1844. Blade and groove sights, with "JH/ P" on the upper left of the barrel and "U.S./ R. JOHNSON/ MIDD...

A) Dated 1848 on the lock plate , "US / H. ASTON" ahead of the hammer and "MIDDtn / CONN / 1848" vertically behind the hammer. U...

This is an example of a U.S. Model 1816 Army Contract Flintlock Pistol manufactured by Simeon North of Middletown, Connecticut between 1817 and 1820.

Brass blade front and groove rear sights, with "US./ TW/ P" on top of the breech. Standard lock plate markings with the date 1837. Smooth ...

This is an example of a U.S. Model 1816 Army Contract Pistol that was manufactured in the period between 1817 and 1820 by Simeon North of Middletown,

The lock plate is stamped "US / H. ASTON" ahead of the hammer and "MIDDTN / CONN / 1848" vertically behind the hammer. The top o...

Brass sight blade, with "US/ JH/ P" and "H" on the barrel, "1850" tang and a swiveling ramrod. Lock plate is marked &q...

Marked "US / I.N. JOHNSON" on the lock plate in front of the hammer, "MIDDTN / CONN / 1854" vertically at the rear. The tang is ...

Dated 1851 on the lock plate marked "US / H. ASTON & CO." ahead of the hammer and "MIDDtn/ CONN./ 1851" vertically to the re...

Blade front and groove rear sights, with "US/ JA/ P" on the upper left side of the barrel, "S" on the left flat, and "A.WAT...

This is an example of a Tower Flintlock Musket that is accompanied with documentation tying this piece to British General Sir Galbraith Lowry Cole. Th

This is a beautiful example of an engraved and gold inlaid Mangeot percussion pistol with an elaborately carved ebony stock. The barrel is blue and th

A) This matched pair of dueling pistols feature blade front sight and fixed notch rear sight mounted on the barrel tang. The lock, hammer, barrel tang

A) This lot consists of a cased pair of French single shot percussion pistols. The pistol has a blade front sight on the barrel and a notch rear sight

A) No maker markings, with three proofs on the barrel at the breech. Light floral engraving on the lock plate, hammer, trigger guard, upper tang, and

This is an example of an elaborately decorated European Wheelock short rifle that is most likely German or Austrian in origin. The stock side plate is

Manufactured Mid-18th century, this flintlock rifle has a rifled barrel that gauges at approximately .75 caliber. It is most likely of German origin a

This is a massive full stock Wheelock rifle that was assembled/made during the late 19th Century. The 37 3/4 inch barrel gauges at about 80 caliber an

Most likely produced around the first half of the 17th Century. Fixed blade and notch sights, with no visible markings on the barrel. A raised "...

A) Matched pair of elaborate percussion pocket pistols made by John H. Krider of Philadelphia. The pistols were made for Theodore Cuyler (1819-1876),

Made circa 1750. Silver finished brass dovetail front sight on a raised half-ring base, with a notch rear sight and decorative ribbing towards the bre

Produced without sights, with a screw-on cannon barrel and the initials "D M" in script on the lock plate below the flash pan. Smooth stoc...

Produced circa 1770, with no fixed sights on the barrel, which has a duck-bill style oval muzzle, measuring 1 1/2" wide, and only 3/4" tal...

A) The smooth bore barrel gauges at approximately .54 caliber and has a gold inlaid floral pattern. The upper tang features a gold (or brass) wire inl

"W. BOND" marked lock, the top of the rear barrel flat is marked "LOMBARD STREET LONDON" and the left rear upper flat is marked ...

The lock plate is script marked "Rogers". The barrel is equipped with a 11 inch long snap bayonet with the bayonet release on the upper ta...

Lock is marked "Mre r / St Etienne" and the top of the barrel at the breech is stamped an oval Belgian Liege proof. The left side plate is...

This is a Military pattern British Fusil which is a scaled down version of the Brown Bess musket. The lock is marked "P BOND" ahead of the...

Lock is marked "Mre r / der St Etienne" and the left rear of the barrel is stamped "BELGIUM" and there is a star over a circle o...

This is a very early circa 1750-1770 example of pre revolution Seglas made flintlock pistol. Israel Seglas was a Huguenot who came to England from Fra

Having a square off front circa 1750s-1770s, which is typical of guns used during the American Revolutionary War period. The screw on barrel gauges at

5-3/4 inch part octagon barrel, "duck bill" 1-1/2 inch bore. Brown flared walnut stock. The remainder of the metal is a pleasant smooth da...

Circa 1760-1790 (American Revolutionary period). This pistol features a early bannana lock marked "Droixher". The barrel, upper tang, trig...