December 2, 3, & 4 Premiere Firearms Auction

Estimate: $1500 - 2000 1) Package of 10 Burnside Rifle Co. produced 54 caliber cartridges for the Burnside Rifle with 12 caps (a minor area of miss

Estimate: $2500 - 3500 Blade front and 3-leaf rear sights, with "J.S.D." at the breech and the 2-line patent marking on the lever. The ...

Estimate: $2750 - 4500 Manufactured from 1853 to 1855 with a total production of approximately 4,997. This is the earliest Sharps Model with the di

Estimate: $2000 - 3000 Blade front and ladder rear sights, with "L.F.R." stamped on the left barrel flat. Casehardened receiver, with b...

Estimate: $1600 - 2500 This is an example of a late Civil War production Burnside Carbine with the noticeable guide screw in the center of the righ

Estimate: $1500 - 2500 This is a solid example of one of the Model 1862 Sharps & Hankins carbines purchased by the U.S. Navy between 1862-186...

Estimate: $2000 - 4750 Manufactured for Remington under a sub-contract with Savage Arms Company, the Split Breech carbine is doubly significant bec

Estimate: $2750 - 3750 The Smith carbine was manufactured by the Massachusetts Arms Co., Chicopee Falls, Massachusetts and was one of the most impo

Estimate: $1200 - 1700 Manufactured by Richardson & Overman with approximately 5,000 produced in Spencer 56-52 caliber and at least half of t...

Estimate: $45000 - 65000 This martially inspected Henry lever-action rifle manufactured in January 1864 by the New Haven Arms Company as part of an

Estimate: $2000 - 3000 Originally developed and refined by Augustus Bennett, cartridge boxes like these were marketed as accessories for the Frank

Estimate: $1400 - 2250 Single fuller blade, 30" with niter blue finish starting at the halfway point, gold accented engraved designs, and &q...

Estimate: $800 - 1300 1) Unmarked sword, 34" single fuller blade, 2-branch guard and checkered grip panels. With an iron sheath. 2) English ...

Estimate: $750 - 1300 Carbon steel blade, 13 inches with a 5 1/2 inch back clip and the Randall stamp on the left side. Upturned dual quillion bras

Estimate: $700 - 1000 Constructed from brass, this appears to have once been a 2-mantle gas lamp which was converted to electric at some point. Mea

Estimate: $700 - 1000 The clip point blade is 16 inches long with a ricasso marked "ANO 18 2". Brass handle and straight cros

Estimate: $800 - 1300 1) U.S. Ames Model 1906 light cavalry sabre, 34 5/8" double fuller blade with "U.S./J-C" on the left ricasso...

Estimate: $900 - 1400 1) Unmarked sword, 19 3/4" blade with a cast metal hilt, a brown leather sheath and metal throat and tip. The grip is ...

Estimate: $7500 - 12000 Civil War Morse carbine manufactured by the State Military Works in Greenville, South Carolina. The State Military Works ma

Estimate: $7500 - 15000 Each seal measures 3 1/2 inches in diameter, featuring George Washington in the center (modeled after an equestrian statue

Estimate: $1800 - 2750 This is a solid example of a scarce Gibbs Carbine that was manufactured by William F. Brooks, New York City in 1863. Only 1

Estimate: $1400 - 2250 Manufactured circa 1865, the Palmer carbine was manufactured by E.G. Lamson & Co., of Windsor, Vermont, and is signifi...

Estimate: $1300 - 1900 Manufactured from 1858 to 1859, with an estimated production of about 5,000. The left side of the frame is marked "MA...

Estimate: $950 - 1600 This is an example of a Triplett & Scott carbine that was manufactured circa 1864-1865 by the Meriden Manufacturing Com...

Estimate: $1000 - 1500 Type I Carbine with serpentine shaped hammer and lever, rear lock plate screw entering from the right, and a long trigger-li

Estimate: $12000 - 20000 This is a very nice example of the unique and highly desirable Springfield Model 1855 Pistol Carbine with attachable stock

Estimate: $3500 - 5500 Manufactured from 1856 to 1859 with a total production of about 250, of which 100 were made for the Ordnance Department. The

Estimate: $1600 - 2500 Made in the late 1850s and early 1860s, the bulk of production was consumed by Government contracts. Standard "STARR....

Estimate: $2250 - 3250 Brass cone front and frame notch rear sights, with "PATENTED SEPT. 14. 1858/E. REMINGTON & SONS . ILION NEW YORK...

Estimate: $900 - 1400 Produced as part of a U.S. Ordnance contract issued in November 1864, the Rodgers and Spencer revolvers were delivered too la

Estimate: $1600 - 2500 This is an example of a martially inspected Remington New Model Army Transitional Revolver. Transitional New Model Army Rev

Estimate: $10000 - 20000 Born in France on April 21, 1821, young Francois Alexandre LeMat studied for the priesthood in a small seminary in Brodeau

Estimate: $1100 - 1700 Blade front and notch rear sights, with "ADAMS PATENT. No 30288" on the right side of the frame, next to the cyl...

Estimate: $850 - 1300 Blade front and notch rear sights, with "ROBERT ADAMS. 76, KING WILLIAM STREET LONDON" on top, "ADAMS PATENT...

Estimate: $7500 - 15000 Fixed sights, with the one line address on top of the barrel, 5 round scenes on the cylinder and matching numbers on the ba

Estimate: $1600 - 2500 This scarce Lower Canada Militia marked Colt Model 1851 London Navy revolver was manufactured in 1855 and is one of approxim

Estimate: $950 - 1600 Manufactured in 1853. One line New York City barrel address, "COLTS / PATENT" on left frame side, and the navy sc...

Estimate: $16000 - 25000 This Henry lever action rifle was manufactured by the New Haven Arms Co., in February 1863. The rifle has the first patter

Estimate: $9500 - 16000 This is an exceptional example of an all original, "attic find" Winchester Model 1866 carbine. The 1866 carbine...

Estimate: $3500 - 5500 This is an example of a U.S. Model 1841 Rifle that was manufactured by the Whitney Arms Co., of New Haven, Connecticut in 18

Estimate: $2250 - 4500 Blade front and three-leaf rear sights, with rack number "277" and "1859" stamped on top of the chambe...

Estimate: $2250 - 3750 This Model 1841 Rifle was later upgraded before the Civil War, with the barrel rebored to 54 caliber, a long range rear sigh

Estimate: $1400 - 2250 Blade front and folding ladder 1000-yard rear sights, with "9225" on the tang, "F.C.W' on the left flat...

Estimate: $1000 - 2000 This is a unique example of a pre-Civil War brass Harpers Ferry bullet mold for four conical bullets. Complete with an origi

Estimate: $1600 - 2500 Heavy 12 inch blade, with an asymmetrical clip point, "U.S.N/D.R/1863" on the right ricasso and "AMES MFG C...

Estimate: $2750 - 4250 Lock plate is dated 1863 and has the eagle/U.S. motif with "WM MUIR & CO. / WINDSOR LOCKS, CT." ahead of the...

Estimate: $1600 - 2500 Blade front and folding ladder rear sights, with "V/P/ eagle head" on the left side of the barrel. The lock is d...

Estimate: $1100 - 1700 Brass blade front and notch rear sights, with "U.S./A.D.K./P" on the upper left of the barrel, "STEEL"...

Estimate: $1100 - 1600 Blade front and folding leaf rear sights on barrel marked with "V P eagle head" proofs on left rear and top date...

Estimate: $950 - 1400 1) Hoover, Calhoun & Company cartridge box, black leather construction with a brass "US" plate on the outer f...