The Premiere Firearms Auction of the Year.

Produced circa 1590, this is a fine example of a German production sporting wheel-lock. Blade front and fixed notch rear sights on the heavy, smoothbo

Possibly Spanish in origin, and made in the late Seventeenth Century, this extraordinary Miquelet features a 30" part octagon barrel with a fla...

The pistol has a smoothbore, half-round/half-octagon barrel dated "1575" on the top flat, with 10 asterix arranged on the top flats and a ...

Possibly French in origin, this very straight profile wheellock weapon is of the highest quality (for the period) in workmanship. Produced with an oct

A) Produced without sights, with a silver wire wrap near the muzzle and raised relief chiseled engraved designs of men, both standing and on horseback

Produced without sights, with a 6" long raised engraved silver band around the muzzle, a 1 1/4" rear band, and wide scroll engraving on th...

This is an example of an 18th Century flintlock Italian Pistol of fine quality of research. Produced without sights, with punch-dot backed scroll engr

Produced without sights, the barrel shows total coverage of deep chiseled engraving, showing a man armed with a club, a woman in fancy garb, zig-zag b

Of unknown origin, possibly Russian or Caucasian. Barrel produced with a sighing rib, with a small gold filled "M" proof on the rib and a ...

A) At first glance one would think this was purely a decorative arm, but closer examination reveals it to be of much better quality and of Mediterrane

Produced without sights, with etched scrollwork on the barrel and tang and a silver barrel band with raised scroll designs. The hammer, flashpan and l

A) The barrel is fitted with a pair of wide silver barrel bands with raised scroll and floral engraving, a raised sighting groove on the tang, and is

Originally developed in the Caucasus and Georgia, and later adopted by the Cossacks. The blade is nearly 12 inches long and 1 1/10 inches wide, with a

11 inch single fuller double edged blade, secured to a projection of the grip with 3 rivets. Support arms measure 7 1/2" long, slightly tapered...

Both knives are fitted with curved blades, flared grip pommels and the Arabian-style sheaths with sharply curved tips. 1) Gold and silver fitted jambi

1) Knife, 8" single edged Damascus blade with a 3 inch false edge, a slight widening before the top, and a triangular gold inlaid floral scroll...

1) Silver hilted Argentine knife, 8 1/2" single edged blade with filework on the spine and a two piece silver grip with engraving and raised fl...

5 1/2" long Damascus steel blade, with a 1" long section of gold wire inlaid leafy vine work on each side near the hilt. The hilt and shea...

7 3/4" long Damascus steel blade, with a 1 3/8" long section of silver wire inlaid leafy vine engraving on each side near the hilt. The hi...

Curved double fuller blade, measuring 9 1/4" long and 2 1/8" wide at the base, with 1 3/4" tall areas of engraved and gold inlaid flo...

Blade is 9" long, with a slight forward cant to the spine, a 1 1/2" triangular panel of silver wire floral inlay on either side, and an un...

Curved double fuller blade, measuring 8 1/2" long and 2 1/4" wide at the base, with no visible maker's marks. The hilt is solid brass,...

1) Gold decorated dagger, 9" wavy double edge blade with raised spine and elevated ricasso with gold floral inlays. The floral design continues...

Two piece construction, with the hilt section produced separately from the blade, which could be European in origin. Blade is 16" long and 1 3/...

1) Katar, 7 1/4" long blade, 2/5" thick near the tip, with a set of 3 reinforced ribs on each side. Twist pattern grip, with 7 long suppor...

1) Spear, measuring 47" in total length, showing a Damascus pattern overall with gold inlaid vine, leaf and scroll designs. The blade measures ...

1) Pesh-Kabz dagger, 9" curved Damascus blade, 1/2" thick near the tip, with engraved scenes of large cats taking down prey on each side, ...

A) Operating out of St. Etienne during the 18th Century, Joseph Lamotte (1716-84) was a known supplier of cavalry arms. Fixed blade sight on the royal

Curved double edged blade, measuring 9 1/2" long and 1 3/4" wide at the base, with 1 3/4" tall triangular areas of gold scroll and vi...

Curved double fuller blade, measuring 10 1/4" long and 1 5/8" wide at the base, with 2" tall gold bordered scenes of a mountain lion ...

Curved quad-fuller blade, measuring 7 3/4" long and 1 5/8" wide at the base, with 1 1/4" tall areas of engraved and gold inlaid flora...

Blade measures 5 1/2" long, slightly wavy with a 1" long triangular gold inlaid scroll pattern on either side near the grip. Metal grip, f...

Probably Middle Eastern in origin. Damascus blade, measuring 6 1/2" long, with a 2" ricasso leading to the blade doubling in thickness and...

The barrel is stamped with a pair of crown over scepter proofs, with a flared octagonal muzzle and a notch rear sight. The ramshorn style butt has two

The pistol is without maker's name. Produced without sights, with engraved bands on the barrel, "P/ crossed scepters" stamp on the lef...

A) This matched pair of late18th Century European officer's pistols have part octagon/part round smoothbore barrels with fluted sighting plane a...

Designed purely as a thrusting weapon, this rapier has slightly longer than standard hilt, which both moves the center of gravity to a point only 1 1/

Produced in the 18th or 19th Century, the katzbalger sword was the chief sidearm of the German Landsknecht mercenary pikemen, emblematic to the point

British 1822 Pattern Officer's Sword with the "VR" cipher of Queen Victoria on the gilded triple-bar hilt with folding guard. The grip...

33 inch single edged single fuller blade, with "x ANDREA x FARARA x" in the fullers. Steel basket hilt with cut-through designs, "A S...

Straight double edged blade, 34" long with triple fullers on each side and no visible makers marks. The guard is fitted with a pair of 2 3/4&qu...

Blade is double edged, measuring 30" long, with short single quillions on either side, stamped "N. TOL" in both with small engraved d...

Measuring 12 1/2" tall from tip to base, the head is of the ranseur profile, with a double edged central blade measuring 6" and a central ...

Blade measures 34" in length, with single fullers on the main body of the blade, engraved with animals flanked by crosses, with triple ricassos...

Introduced to warfare in the 11th Century, the falchion was versatile both on and off the battlefield, and as such were used to a degree that makes su

Blade measures 40 3/4" from the guard to the hilt, with tapered double edges and the inscription "SIC ATUR AD ASTRA" on each side, fl...

Blade measures 41 3/4" from the guard to the hilt, with border engraving on the ricasso and around the single fullers, with engraved fish desig...

24 1/2 inch overall length, with a 14 1/2" barrel with an octagonal cannon muzzle, fixed rear sight, with a round section between the muzzle an...

The high quality Japanese matchlock is 52 1/4 inches in length and has the distinctive stock with short butt. The unique brass Japanese matchlock acti

Fixed sights, with a gently swamped muzzle and silver inlaid designs on the barrel of flowers and a butterfly, along with a silver moon that strongly

Blade front and notch rear sights, with a flared cannon muzzle, brass lock with exposed spring and sear, touchhole cover, pipe guard and ball trigger.

This is a fine original example of a 41 1/4 inch overall length Japanese matchlock. Fixed sights, with a round swamped muzzle on 28 inch barrel with s

Blade is 27 1/2" long, with single hi, wavy hamon, and gold washed copper habaki. Military tsuba, with silver and brass seppa, properly pierced...

Blade is 3 1/4" long, spear pointed with no makers marks. Hilt is finely worked and engraved silver, with clover shaped dual quillions, raised ...

Unmarked 14" dual quillion single edged blade, with a short straight false edge, long ricasso and a brass disc covering the tang. Metal grip, w...

Double edged blade, 5 3/8" long, with a rounded tip and a zig-zag engraved gold finished brass blade wrapped around the ricasso. Dual quillion ...

Iron construction, 24" in height with a 5" long head and 2 5/8" long ax edge, backed by a hammer style rear poll. The round shaft has...

1) Engraved and silver accented knife, 7 1/4" blade with 5" false edge, silver wire inlay on the spine, and scenes of fantastic creatures ...

1) Knife, 3 3/4" single edged blade, with a straight false edge, file work accents on the spine, and an integral single quillion guard. Fitted ...

The only visible marking on the pistol is a "crown over script letter" proof mark on the left stock plate. The barrel has an integral blad...

1) Flintlock powder tester. Determines the force of discharge using a vertically oriented chamber to drive a plate attached to a numbered wheel, gradu

Blade and notch sights, with a "crown" proof on top of the breech, "crown/ JE" on the upper left, "Liege" proof on the...

Made in Mons, a city that is currently Belgian, but has changed hands multiple times since it's establishment by the Romans. Blade sight, with r...

Produced without sights, and marked with a series of faint letter and number stamps on the left flat. The lock is marked with the "prancing lio...

Flared cannon muzzle, with a set of "crown/ V" and "crown/ P" proofs on the left flat and "TY.10895 WILLETT DUBLIN" on...

This is an example of a modified Baker 1841 flintlock rifle. The barrel has been shortened to it's current length of 30 1/2". The left rear...

Bayonet lug front sight and shallow groove rear sight, with a "crown/ Gr/ arrow" and a crossed scepter proof on the upper left side of the...

The lock is marked "P BOND" ahead of the hammer and the top of the barrel is marked "45 CORNHILL LONDON" with recessed "cro...

This French military flintlock guard gun or quite possibly guard de' corp carbine has a lock plate marked with a small proof over "MRE. IMP...

This is an example of a British military Brown Bess musket of the Revolutionary War Period. The lock is marked "HENSHAW" ahead of the hamm...

This is an example of an iron mounted musket made by the British for trade. Bayonet lug front sight and no rear sight, with the only visible marking...

Establishing himself in London circa 1688, Louis (aka Lewis) Barbar was an expatriate French Huguenot who would later become armorer to the Kings Geor

This particular Queen Anne pistol maker has the unusually shaped frizzen spring behind the pan. The position of C. Williamson's maker marking, ...

Produced without sights, with "SMITH LONDON" marked on top of the barrel and two "crown/ crossed scepter" proofs on the undersid...

A) Brass construction, in the Queen Anne style with a box lock action. Barrel is unmarked, with a polished-down wrench lug on the underside. Brass fra

A) Made in the Queen Anne style by a member of the Freeman family, who were chiefly active as London gunsmiths in the mid 1700s. Cannon style muzzle,

A) The lock plate is marked "TWIGG", "LONDON" on the top barrel flat and two British proofs on the left barrel flat. Floral engr...

This exquisite rifle shotgun combination features three sets of barrels. One set of barrels is 27 3/4" in length, with a 16 gauge barrel on the...

The analysis of this unique wheelock style air gun can be best described in the book "Smith's Standard Encyclopedia of Gas, Air and Spring ...

The front of the lock plate is marked "A Berlin" above the frizzen spring and "I.C. SAPS" below the spring. The lock plate, hamm...

In many ways ahead of their time, the black powder era saw the development of several weapons that used compressed air in place of combustible powder

Most likely French in origin, with no markings save the serial number 11 on the rear face of cylinder, ejector housing, trigger and barrel lug, and ...

Raised bead front and hammer groove rear sights, with scroll engraving on the breech, "W. ORTMANN" on the left side, and matching numbers ...

Blade front and notch rear sights, with the King Williams Street address on the frame and top barrel flat. Scroll engraving is present on the barrel,

This revolver is a bit unusual in that all the metal surfaces (except the hammer and safety mechanism which are fire blue) are casehardened. The top b

A) No maker markings. 10-round cylinder with light floral engraving on the chambers. A faint floral engraving is featured on the frame. Grooved grips

A) Two high quality, matched, European smoothbore percussion pistols. The pistols are Spanish made and are relief chiseled. The barrels are silver inl

A) This is a matching pair of French Dueling pistols which feature a dove tailed blade front sight and notched rear sight mounted on the barrel tang.

A) This is a fine original cased pair of English Percussion Holster Pistols made by James Collins of London circa 1840. James Collins had a shop at 12

A) Flat topped barrel produced without sights, showing light leaf engraving, with panels of leaf and punch dot engraved brass at the breech, along wit

A) Dovetailed blade front sight and elevation screw adjustable notch rear sight, with "C. WEYGAND. WIESBADEN" in gold on the top flat and ...

A) Made circa 1850 with a rifled 10-inch octagon barrels with dovetail mounted steel pin front sights and rudimentary rear sights. The barrels are de

Produced circa 1856-1859 by North and Savage of Middletown, Connecticut. The action is worked by an operating lever mounted in the bottom strap positi

Made from 1866 to 1879, using the frame of a New Model series revolver. Blade front sight and folding leaf rear sight, marked "D.T. / SEELY / D...

Manufactured in Belgium for sale to the Mexican government in the late 1890s. Blade front and ladder rear sights, with the upper tang marked "H...

Blade front and fixed leaf rear sights (folding leaf absent) on a barrel faintly marked "ACIER FONDU" (cast steel) with a sling swivel. Th...

Performed by an unknown gunsmith, this arm uses the frame of a Savage Double Action Percussion Navy as the basis of a cartridge firing rifle. The fron

Patented by John Miller in 1829, this rifle is most commonly associated with William Billinghurst, its most famous maker. Hooded pin front and buckhor

Manufactured circa 1835 to 1850, with only a few hundred produced. Post front sight and a fixed notch rear sight, with "J. MILLER" on the...

Produced 1866-1879, with total quantity estimated at less than 1000. This rifle features fixed sights on a barrel marked "PATENTED SEPT. 14, 18...