December 2, 3, & 4 Premiere Firearms Auction

Estimate: $2750 - 3750 Manufactured in 1957. The barrel is fitted with a factory installed Lyman Cutts compensator and vent "PIN" rib. ...

Estimate: $1600 - 2500 Manufactured in 1947, single brass bead sight, 2 3/4 inch chamber, cylinder choke and take-down frame. Standard barrel marki

Estimate: $1400 - 2000 Manufactured in 1957. Standard markings including factory proof on receiver and barrel. 3 inch chambers and choked full. Pla

Estimate: $2500 - 5000 Red front bead and ivory mid bead sights on the rib, which is marked "R 411" on the underside, with full choke, ...

Estimate: $1400 - 1800 Manufactured from 1960-1965. Fiberglass wrapped steel barrel, aluminum alloy receiver. Simmons vent rib with high visibility

Estimate: $1200 - 1600 Made in the first year of production in 1933. Barrel is marked with the two line address marking on the right and the model

Estimate: $1100 - 1600 Manufactured in 1931. Barrel has standard Winchester markings, choked full and Simmons vent rib with dual ivory sights. Cust

Estimate: $4500 - 9000 Crafted by Antonio Zoli, issued in cooperation with the Naval Museum of Genoa and authorized by the United States Historical

Estimate: $3250 - 4250 Introduced in 1981 and manufactured in Japan, this Grade 1, 4 barrel set consists of a 12, 20, 28, and 410 set of barrels. A

Estimate: $1500 - 2250 This shotgun is one of the 1000 Duck Stamp 50th Anniversary shotguns manufactured by Ruger circa 1984. This shotgun has the

Estimate: $1200 - 1800 The left side of the barrel is marked "SAI, CUMMIMG GA" and "7mm Rem. Mag." Fitted with ramp blade and...

Estimate: $1600 - 2250 The left side of the barrel is marked "SAI, CUMMING GA" and ".308 Win." and the barrel has ramp blade ...

Estimate: $1500 - 2000 Ramp blade and raised notch adjustable sights on the twist barrel which is marked "7mm WSM" and "SAI, CUMMI...

Estimate: $1200 - 1500 Manufactured in Austria. Adjustable ramp blade and raised notch rear sights on the twist barrel marked "SAI, CUMMUNG ...

Estimate: $1500 - 2000 The barrel has a fluted section and ramp blade and raised notch adjustable sights and is marked "SAI, CUMMING GA"...

Estimate: $1400 - 1900 "SAI, CUMMING GA" and ".270 Win" marked spiral barrel which features ramp blade and raised notch adjus...

Estimate: $1200 - 1800 Spiral barrel manufactured without sights and receiver tapped for scope mounting. Barrel marked ".243 Win." and ...

Estimate: $1600 - 2500 The action was manufactured in 1902. The rifle is fitted with an unmarked barrel manufactured without provisions for a front

Estimate: $1200 - 2000 Heavy barrel manufactured without sights and marked "22 B.R./247ND" on the left side at the breech and the recei...

Estimate: $850 - 1300 The replacement barrel is unmarked and fitted with a 10 power Lyman Targetspot scope adjustable for windage and elevation. Th

Estimate: $1000 - 1500 Manufactured between 1952 and 1956. Ramped silver blade front sight with a Marble's adjustable rear sight. Features do...

Estimate: $500 - 750 Heavy barrel manufactured without sights and equipped with a BSA Mil Dot 8-32x40 scope with scope rail. Smooth light hardwood

Estimate: $900 - 1400 This is a post-WWI hunting/sporting rifle as produced by an unknown gunsmith, on a military style action. This rifle has a st

Estimate: $800 - 1100 Shilen barrel manufactured without sights and marked "W TARTER-SHILEN/17 Mach IV". Receiver has serial number and...

Estimate: $1200 - 1700 Ramp blade and two leaf sights, Geco 4x scope, and double set triggers. Checkered full stock with a serrated cartridge trapd

Estimate: $2000 - 3000 Early pre-ban, model, with post pin front and 2-leaf rear sights, with a birdcage flash hider, bayonet lug, dual safety cont

Estimate: $1000 - 1500 This is the very desirable commercial/sporter version of the famous H&K 91 series rifle. These rifles used the same de...

Estimate: $1500 - 2500 Bird cage flash hider and bayonet lug on the barrel, with a Simmons Aetec Master Series 2.8-10x on the A4 upper. Extensive u

Estimate: $1300 - 2000 Introduced in 2003. Fitted with a flash hider on the 1 in 10 twist free-floating barrel, with mounting rails on the gas bloc

Estimate: $800 - 1800 Introduced during the 1994-2004 Gun Ban, this rifle was made in America using the H&K licensed machinery and blueprints...

Estimate: $1000 - 1600 Adjustable post front and 2-leaf rear sights, with a 3-prong flash hider, bayonet lug, triangular handguard, "AR-15&q...

Estimate: $3000 - 5000 Developed in the 1930s by Charles Manville, a machine shop owner. After the success of a series of gas pens and a 12ga gas p

Estimate: $1800 - 2500 Built around an M4-pattern receiver, with a folding adjustable "YHM" front sight, and a Rock River adjustable re...

Estimate: $1300 - 1600 Desirable target/competition model with the picatinny rail upper receiver (handle not included), heavy target weight barrel,

Estimate: $900 - 1400 Post-ban production. Adjustable pin front and 2-leaf rear sights, with crowned muzzle on the "C MP 5.56 NATO 1/7"...

Estimate: $1500 - 2000 Produced in Geneseo, Illinois. Standard blade and adjustable rear Lufkin peep sights and equipped with a Tasco Pro Point red

Estimate: $1000 - 1500 Semi-automatic version of the famous Thompson SMG, with standard markings, fixed front and folding adjustable rear sights, c

Estimate: $1000 - 1500 Measuring 17 1/2 inches overall, this is a high quality M1 copy, with Type 1 band, flat bolt, button safety and a high wood,

Estimate: $950 - 1300 Fully functional, non firing, fine quality scale miniature of the flat top Colt Buntline Special Revolver. BBL: 7 1/2 inch

Estimate: $700 - 1000 Standard miniature Colt 1861 revolver with shoulder stock as issued by the U.S. Historical Society. Comes with the correct co

Estimate: $800 - 1200 Fully functional, non firing, fine quality scale miniature of the Presidential Edition Colt 1951 Navy revolver with correct c

Estimate: $700 - 900 Fully functional, non firing, fine quality scale miniature of the Colt 1951 Navy revolver with royal purple velvet lined parti

Estimate: $1500 - 2000 This is one of the Presidential Edition by the United States Historical Society 1:2.125 scale miniature of the classic Colt

Estimate: $1000 - 1500 Manufactured by Uberti, this is a fully functional, non-firing, fine quality 1:2.125 scale miniature of the classic Colt Sin

Estimate: $700 - 1000 This revolver was licensed by Colt and issued by America Remembers, and has standard barrel and frame markings. Comes with th

Estimate: $800 - 1000 Fully functional, non-firing, fine quality scale miniature cutaway of the Colt Single Action Army revolver. The cutaway secti

Estimate: $700 - 900 This is one of 1500 produced fully functional, non-firing, fine quality 1:2.125 scale miniature of the classic No. 1 Colt Sing

Estimate: $7500 - 15000 Manufactured in 1910 and subsequently engraved and gold inlaid by Master Engraved Alvin White in 1968. The revolver feature

Estimate: $5500 - 8000 This unique and beautifully engraved and gold inlaid revolver is finished in Colt Royal blue with a gold plated cylinder pin

Estimate: $3750 - 5500 Manufactured originally as a standard Colt Single Action Army revolver in 1899 and subsequently professionally engraved and