Nov/Dec. Premiere Firearms Auction

Estimate: $5000 - 8000 Discussed in Winant's "Firearms Curiosa", with an example pictured on page 159, the Frankenau was patented i...

Estimate: $2000 - 3000 This sleeve pistol was described in Elek B. Juhasy's August 27, 1929 patent as an "automatic concealed firearm fo...

Estimate: $3500 - 5500 This is an example of an extremely rare percussion combination key/pistol. Measuring 4 1/2" in total length, the unde...

Estimate: $4500 - 6500 A) Manufactured circa 1920s. The two cell type flashlight is controlled by a sliding button on the left side. The revolver u

Estimate: $4250 - 5500 This unique pistol was manufactured without sights or markings. A spring loaded flip-up barrel is controlled by a pushbutton

Estimate: $3000 - 4500 German silver barrel, marked with a pair of crossed scepter proofs on the upper left flat. Fitted with a smooth straight ham

Estimate: $1400 - 2250 This percussion pistol has double barrels that are separated by a 9 inch blade. The spear blade features an extensive floral

Estimate: $1400 - 2250 This unique knife pistol resembles an Unwin & Rodgers but is unmarked. The barrel is stamped with two British proofs a...

Estimate: $1400 - 2250 The 3 1/4 inch folding blade is marked "JAMES/TIDMARSH" on the left side of the ricasso and the left side of the...

Estimate: $4750 - 6000 Pin front and hammer notch rear sights, with "JAMES WARNER. SPRINGFIELD, MASS. U.S.A." on the top strap, "1...

Estimate: $1100 - 1600 This is a scarce example of an early production .22 caliber sidehammer revolver manufactured by Allen & Wheelock circa...

Estimate: $3750 - 5500 Also known as the "Protector", this model was manufactured in 1883 with a total production of only about 360. Al...

Estimate: $900 - 1400 Manufactured from 1866 to the late 1880s with a total production of approximately 8,000. These pistols feature a unique pivot

Estimate: $600 - 900 Manufactured circa 1863-64. This revolver is chambered for the 32 rimfire cartridge a features a 5 round cylinder with individ

Estimate: $2500 - 4000 Manufactured from 1912 to 1935 this Type III derringer is marked "REMINGTON ARMS--U.M.C. CO. ILION N.Y." on the ...

Estimate: $2500 - 3750 Manufactured between 1865 and 1888, this pistol is also known as the Saw Handle Deringer. Correct without markings (early pr

Estimate: $1500 - 2250 Manufactered from 1871 to 1888. The pistol has the standard factory scroll engraving with the top barrel flat marked with th

Estimate: $2500 - 3500 Manufactured from 1865 to 1888 with this a factory engraving. The sides of the frame feature scroll engraving on a punch dot

Estimate: $2500 - 3500 Manufactured circa 1867-1868, this is an example of a Type I, Transitional (aka Model 1 First Variant) over/under Remington

Estimate: $1200 - 1800 One of approximately 25,000 manufactured between 1863 and 1888. This example is marked on the top of the barrel cluster &q...

Estimate: $2750 - 4500 Manufactured from 1864 to 1870 these front loading teat-fire revolvers were one of the most successful competitors to Smith

Estimate: $1500 - 2250 Produced circa 1862. These pistols are a primary derringer in any early pistol collection, as they were the first true large

Estimate: $1500 - 2250 Manufactured from 1861 to 1863. The top of the barrel is marked "D. MOORE.PATENT.SEPT. 18. 1860". Decorative bro...

Estimate: $3000 - 4000 Produced between 1864 and 1870. While a number of Moore revolvers are seen with engraving, the level of embellishment on thi

Estimate: $1100 - 1900 A) Manufactured from 1861 to 1863. The barrel is stamped "D. MOORE PATENT SEPT. 18, 1860" on the top flat. The f...

Estimate: $3500 - 5500 This is an example of a unique 19th Century style French ring gun that was most likely manufactured in the 20th Century (wha

Estimate: $2500 - 3500 These double barrel deringers or "pocket pistols" were manufactured by the American Arms Co. of Boston, Mass. fr...

Estimate: $950 - 1400 Manufactured from 1891 to 1892 with total production estimated at 3,000. The side plates have smooth hard rubber panels and a

Estimate: $850 - 1300 Standard two line makers mark on the right side of the frame, with "MITRAILLEUSE" on top of the barrel rib, and n...

Estimate: $2250 - 3500 Produced without sights, with Liege proofs on the rear of the cylinder. The 2 1/2 inch, wavy, triangular blade folds up the

Estimate: $800 - 1300 Manufactured without sights, marked "LE MERVEILLEUX" on top of the barrel and "LORON/S.G.D.G./JR&Cle&quo...

Estimate: $1100 - 1600 The 5-shot, hinged barrel cluster is marked "ROBBINS & LAWRENCE", "WINDSOR, VT" and "PATENT 1...

Estimate: $1500 - 2250 No makers markings. The pepperbox is very similar to the Blunt & Syms small frame, but with a square butt, not the bag...

Estimate: $1200 - 1800 A) Intricate scroll engraved frame, hammer, and trigger guard with the maker's London address on the side plate and ba...

Estimate: $1100 - 1600 A) 6-shot unmarked barrel cluster with standard engraving on the frame. Ring trigger and varnished grips. BBL: 4 3/4 inch

Estimate: $1200 - 1800 A) Engraved frame with "J.R. COPPER'S PATENT" on left side. British proofs are present on each barrel cluste...

Estimate: $3500 - 5500 This is a unique example of a French single shot percussion ring gun. The band of the ring is marked "LE PETIT PROTEC...

Estimate: $1400 - 2250 Featuring a barrel with a band of floral engraving, and the right side of the frame has a similar pattern around the edge, w

Estimate: $1800 - 2750 This is one of an estimated 170 iron frame models manufactured towards the end of production. The left side of the top strap

Estimate: $1400 - 2250 Manufactured from 1864 to 1872 with a total production of about 3,000. Marked "WM W. MARSTON/PATENTED/MAY 26. 1867/NE...

Estimate: $1600 - 2500 The German silver barrel is unmarked. The pistol is equipped with 3 1/4 inch spear point and 1 3/4 inch unique semi-curved s

Estimate: $2500 - 3750 Manufactered circa 1870 this is a rare factory engraved Ballard derringer. The brass frame has a scroll and punch dot engrav

Estimate: $2750 - 4500 Single brass bead sight, with "EATON & ABBEY, CHICAGO - LAMINATED STEEL" on top of the rib, light scroll eng...

Estimate: $2000 - 3000 Introduced circa 1850. Although unmarked, this whaling gun is the unmistakable design of C.G. Brand of Norwich Connecticut.

Estimate: $2750 - 4250 Manufactured by James M. Burnie, this fine quality fowling piece(approximately 14 gauge) features a unique grip safety mount

Estimate: $1000 - 1500 This massive 8 gauge shotgun was introduced circa 1890. The top of the barrel at the breech is stamped "AMERICAN"...

Estimate: $1500 - 2500 This unique underhammer percussion pistol is equipped with a checkered walnut stock. The stock has a crescent brass buttplat

Estimate: $850 - 1400 Manufactured from the mid-1860s to the mid-1870s these shotguns used special steel cartridges. The four shot carrier consists

Estimate: $1000 - 1600 Six shot barrel cluster with the left side of the hammer marked "ALLEN & THURBER/GRAFTON MASS" and the top o...

Estimate: $950 - 1600 This is a rare example of a 6-shot percussion pepperbox with the Samuel Sutherland of Richmond, Virginia, marking on the hamm

Estimate: $1000 - 1500 A) Barrel cluster has the address and cast steel/warranted markings with the hammer having the 1848 patent marking. Standard

Estimate: $1200 - 1800 A) Italian superposed pistol script marked "Micheloni a Brescia" on the top of the barrel with a ramrod mounted ...

Estimate: $900 - 1400 A) One of an estimated 200 pepperboxes manufactured from 1852 to 1858. Ribbed 5 inch barrel cluster with the cast steel and a

Estimate: $3000 - 5500 Manufactured from 1912 to 1935 this is an example of a Type III or Model 4 Derringer. The top of the barrel rib has the Remi

Estimate: $1800 - 2500 Manufactured by Moore's Patent firearms Company 1860 to 1865 and National Arms Company from 1865 to 1870 with a total ...

Estimate: $850 - 1300 This early production Type III Derringer has an extensive custom scroll and punch dot engraving on the barrels, frame sides a

Estimate: $850 - 1300 Single bead sight, with "GAULOIS" and the Manufacture Francaise proof on the barrel, "CAL./8m/m" over t...

Estimate: $1100 - 1600 Manufactured from 1891 to 1892 with an estimated 3,000 manufactured. The side plates have checkered hard rubber panels and a

Estimate: $950 - 1400 Manufactured from 1867 to 1888. The top of the barrel has the two line address/Elliot patent date marking. The serial number

Estimate: $1300 - 1800 A) One of approximately 3,000 manufactured in the 1860s. The sides of the frame have the patent date and address markings ar

Estimate: $3000 - 4500 Measuring 32 1/2 inches overall, with an iron and brass tip, brown varnished shaft, a pair of silver collars with "BR...

Estimate: $850 - 1300 A) Measuring 34 inches overall, with a single bead sight, brown painted shaft, brass plaque on the underside near the top, an

Estimate: $900 - 1400 Fixed front sight and adjustable notch rear sight on a barrel marked "R.M. WILDER COLDWATER MICH." The lock plate...

Estimate: $1200 - 1800 Fixed brass front sight blade and fixed rear sight with the top flat of the barrel marked in script "W. Goldsmith&quo...

Estimate: $1000 - 1500 A) Dovetailed German silver blade front and notch rear sights, with "DERINGER" on top of the breech and "XX...

Estimate: $900 - 1400 A) Barrel is marked "CAST STEEL/PATENT" and "170" and top strap is marked ""CASE WILLARD &...

Estimate: $1600 - 2500 The pistol has a 3 1/4 inch long folding blade and a iron ramrod with a German silver tip mounted where a second blade is us

Estimate: $2750 - 4250 Manufactured from 1864 to 1872 with total production approximately 3,300. The sides of the scarce 4 inch long three superpos

Estimate: $1400 - 2250 The German silver barrel has two British proofs stamped on the upper left flat. The 2 inch and 3 inch blades are marked &q...

Estimate: $1000 - 1700 Manufactured from 1901 to 1915 with a total production of only several thousand of these truly unique pistols. This example

Estimate: $950 - 1400 Manufactured in the 1890s these pistols featured a rebated barrel with a band of floral engraving, removable side plate with

Estimate: $900 - 1400 Produced circa 1870-1882. Top strap groove sight with the left side marked "MY FRIEND PAT'D. DEC. 26, 1865"....

Estimate: $1300 - 1900 Manufactured from 1874 to 1879. The upper left barrel flat has the Wesson & Harrington address and patent dates markin...

Estimate: $900 - 1500 Nickel finish with casehardened hammer and trigger guard, with a folding nickel plated hammer spur marked with the 1885 paten

Estimate: $1200 - 1700 Manufactured in the 1870s with total production estimated at 1,000. Blade and notch sights, with the two line address and pa

Estimate: $1800 - 2750 One of approximately 1,000 Forehand & Wadsworth Side Hammer 22 Revolvers manufactured in the 1870s. The left barrel ha...

Estimate: $1100 - 1600 A) Manufactured circa 1868 to 1873, this revolver is one of approximately 8,000 Second Models manufactured. The Second Model

Estimate: $1400 - 2250 Manufactured from 1891 to 1892 with total production estimated at 3,000. The side plates have smooth hard rubber panels and

Estimate: $600 - 800 Manufactured from 1865-70. Standard barrel address with the patent date on the underside. Brass frame has the scroll and punch

Estimate: $2250 - 3500 Also known as the "Kickup Model" with an estimated 1,000 manufactured from 1864 to 1876. The grips and barrel ar...

Estimate: $900 - 1400 These Derringers were manufactured between 1863 and 1870 with an estimated 6,000 produced. The top of the barrel is marked ...

Estimate: $1200 - 1800 Manufactured circa late 1870s - early 1880s. The only visible marking is on the left side of the barrel "PAT. JAN. 15...

Estimate: $850 - 1300 Blade front and recoil shield notch rear sight, with "GALAND" on the left side of the barrel lug, caliber marking...

Estimate: $950 - 1300 A) Manufactured from 1865 to 1871. Standard two line address/1865 patent date barrel marking and barrel and grips are numbere

Estimate: $1400 - 2250 Manufactered from 1858 to 1864 with total production of about 1,500 with 1,200 having the sliding knife blade such as this e

Estimate: $1600 - 2500 One of the oddest of palm squeezes, the Little All Right was patented by Edward Boardman and Andrew Peavy in 1876. The top o

Estimate: $950 - 1400 Also known as the Parrot Beak, this deringer was manufactured from 1911 to 1915 with less than 1,400 produced. It features a

Estimate: $1400 - 2250 The German silver barrel has two British proofs stamped on the upper left flat. The 2 inch and 3 inch blades are marked &q...

Estimate: $800 - 1400 Manufactured from 1891 to 1892 with an estimated 3,000 manufactured. The side plates have smooth hard rubber panels and are m

Estimate: $600 - 900 This pistol features a straight standing breech, rounded grip to frame juncture, barrel release on the underside of the frame

Estimate: $1400 - 2250 This is a brass framed percussion trap gun manufactured by the Getsem Gun Co. of Lincoln Nebraska. The stand is composed of

Estimate: $1000 - 1500 Manufactured in the 1890s these pistols featured a rebated barrel with a band of floral engraving, removable side plate with

Estimate: $1800 - 2750 A) The top of the Damascus barrel is marked "ENI P BAUCHERON A PARIS" and the left rear of the barrel has a &quo...

Estimate: $800 - 1200 German silver barrel marked "UNWIN & RODGERS/PATENTEES. SHEFFIELD" on the left flat and "NON*XLL" o...

Estimate: $1200 - 1800 A) Produced circa 1870-1882. Top strap groove sight, with the left side marked "MY FRIEND PAT'D. DEC. 26, 1865&q...

Estimate: $850 - 1200 A) Produced circa 1870-1882. Top strap groove sight, with the left side marked "MY FRIEND" below the cylinder. S...

Estimate: $1800 - 2750 The left side of the frame has a small "LF" and the right side of the frame has a small "EPREZ" markin...

Estimate: $1400 - 2250 The top barrel flat is marked "EPROUVE" with "crown/R" and "*AH" proofs on the right flat. T...

Estimate: $900 - 1400 The LeFaucheux marking appears around collar of the barrel cluster which consists of four smooth bore barrels. The frame is f

Estimate: $2500 - 3500 A 3 inch spring loaded blade is mounted on the right side and is released by the cork screw folding trigger when it is pulle