Premiere Collector's Firearms Auction

A) The Pre-Woodsman Model was manufactured from 1915 to 1927 and prior to the "Woodsman" name. This particular pistol was manufactured in ...

A) Manufactured in 1969. Marked "WOODSMAN" on the left side of the frame underneath the Rampant Colt, Hartford address on left barrel sid...

A) Manufactured in 1950. Marked "MATCH TARGET" under the Rampant Colt on left side of frame, two line Hartford address on left barrel side...

Manufactured from 1958 to 1963 as part of the Model 102 series. Patridge ramp front and full adjustable rear sights on a barrel with ribbed sides, det

This is a nice example of a factory engraved High Standard pistol done by Mike Gouse. The sides and top of the barrel, frame sides, sides and top of t

A) Produced in 1950, only 1200 were made overall. Partridge blade front and adjustable rear sights, with standard markings. Equipped with a takedown l

A) Introduced in 1945. This pistol features floral scroll and punch dot background engraving on the barrel frame, slide and back strap done by High St

A) Introduced circa 1945. Fixed blade and adjustable notch rear sights with a heavy barrel and standard markings. Fitted with checkered walnut grips.

Discontinued in 1962, the Dardick combined a fixed in-grip magazine with a 3-chamber open sided cylinder to feed the proprietary "Tround",...

Manufactured in Belgium from 1970 to 1974. Adjustable target sights and gold washed trigger. The breech side of the barrel, slide, and front strap ar

This is a rare presentation/display Gyrojet pistol. These pistols were produced in the mid to late 1960's and was actually used in an early Jame...

Manufactured by FN between 1962 and 1974. Patridge front and adjustable rear sights, with a serrated gold trigger, combination safety switch/ dry fire

Introduced in 1963. Chambered in the 221 Rem Fireball caliber, standard markings, blade front and adjustable rear sights, equipped with a Simmons 2.5X

Standard markings, with blade front sight and fully adjustable rear sight, receiver grooved for scope mount and adjustable weights below barrel. Check

Patridge blade front and fully adjustable rear sights, receiver grooved for scope mount and adjustable weights below barrel. Standard markings, with a

Manufactured by FN between 1962 and 1974. Patridge style front sight and an adjustable rear sight. Serrated gold trigger. Smooth forearm and checkered

Constructed from 3/8" carbon steel stock, 11" blade with sharpened back clip and the scimitar flanked Randall marking on the left side. Du...

Nine inch carbon steel clip point blade of 1/4" stock with sharpened clip, serrated thumb rest and the scimitar flanked "RANDALL MADE"...

Both knives bear the standard Randall markings, with brown leather JRB sheaths. 1) Randall Model 10-7 Salt Fisherman/ Household Utility knife, 7&quo...

Both knives have 6" drop point blades with thumb serrations and standard markings, single quillion guards and brown leather Randall sheaths wit...

All three knives have single quillion German silver guards and brown leather Randall JRB sheaths, and except as noted have standard markings and carbo

Nine inch carbon steel clip point blade of 1/4" stock with 3 1/2" sharpened back clip, and the scimitar flanked Randall marking on the lef...

1/4" carbon steel blade, 7 1/2" long with 3" sharpened clip, with the two line scimitar flanked Randall markings on the left side. Th...

Both knives have carbon steel blades with standard markings, brass dual quillion guards, plastic spacers and brown leather Randall JRB sheaths with sh

1/4" thick, 6" long carbon steel drop point blade, with the Randall markings on the left side. Brass single quillion guard and Duralumin p...

Produced from 1/4" carbon steel, 6" drop point blade with thumb rest, 2" sawblade on the spine, Randall markings on the left side and...

Both knives have 7 1/2" drop point blades with thumb serrations and standard markings, single quillion German silver grips, plastic spacers, an...

This is a limited edition of 1,000 manufactured in Japan, this auto 5 features a blue barrel and coin finish receiver. The receiver is rolled in a flo

This is a two barrel set Winchester Parker DHE shotgun. 26 inch long 20 gauge barrel with solid rib, single bead sight, 2 3/4 inch chambers, chokes ma

Remington's forst model of over and under shotgun, with only 5100 produced from 1931 to 1944. Features dual bead sights on a vent matte rib, 2 3...

Manufactured form 1963 to 1987. Dual ivory bead sights, 2 3/4 inch chambers, single trigger, and tang mounted safety/selector. The lower barrel is thr

Manufactured in Japan, features a single bead mount (bead absent) front sight on a solid matte rib, chambered 2 3/4 inch, chokes marked improved modif

Ported vent rib barrel with ivory front bead and bright center bead sight. Features 2 3/4 inch chamber, improved cylinder choke, single trigger, and t

A) Introduced in 1963. Single bead front sight on a vent rib, chambered for 3 inch shells plastic only, choked full, and standard markings with the si

A) Standard markings and features with 2 3/4 inch chamber, screw-in choke, rubber recoil pad, length of pull is 13 3/4 inches. Complete with choke too

A) Dual bead sights on a matte vent rib with 3 inch chamber and choked modified. Standard barrel and receiver markings. Fitted with a checkered beaver

Manufactured circa 1889. Single bead sight on a concaved solid rib marked with the one line Parker address and "DAMASCUS STEEL". 2 3/4&quo...

Single bead sight 2 3/4 inch chambers, choked full/improved modified, ejectors. The casehardened action is scroll engraved with an Irish Setter on poi

Excellent example of a field grade shotgun. Single bead sight, 2 3/4 inch chambers, choked full/full, extractor, double triggers, and tang mounted saf

Manufactured from 1911 to 1946. Dual ivory bead sights, choked improved modified/modified, extractor, double triggers, and tang mounted automatic safe

Desirable, Grade I factory engraved Ithaca 20 gauge shotgun, manufactured from 1908 to 1926. Single bead sight, choked improved modified/full, with ej

Despite being offered as a production gun, actually it was a hand built custom made shotgun. From 1931 to 1959 it was considered a production line gun

Blade front sight with matte sight groove, choke marked "FULL" with the standard address and patent markings on the barrel. The receiver i...

Single bead front sight with 2 3/4 inch chamber and choke marked modified. Winchester oval proof stamped at breech end of barrel and receiver. Matchin

Manufactured from 1936 to 1959. Dual bead sights on the solid rib, chambers measure 2 3/4", chokes marked "WS-2" and "WS-1"...

Manufactured in 1959. Single bead front sight, 3" chamber, choked full. Standard markings including the Winchester oval proof on top of the bar...

This is a custom order Trap shotgun from the Winchester Custom Shop. It features a red bead front and steel bead sight on the matte vent rib. The left

A) Manufactured in 1958. Single bead front sight, 2 3/4" chamber, marked choked full. Standard markings, including the Winchester oval proof on...

A) Manufactured circa 1955. Double bead sights on the matte rib, standard markings on the left rear of the barrel as well as the circled "W&quo...

Fluted barrel manufactured without sights. Mounted with a Leupold 3-9 scope. Standard markings, hinged floor plate, and one-piece synthetic pistol gri