B & K Industrial Tool Grinding LLC

Jaws 2 7/16" wide X 1 1/2" Deep Max openning 2 11/16". Note one ear broken

w/ straight bar in case. One starret Back - Plunger Dial test indicator No. 196B-1 in box. One starret No. 57 Test Indicator Holder with Shaft.

left 0 to 50 degrees right tiltable 0 to 50 degrees, with 3 T-Slots and Rotating Handle.

Used on 310-16 Steel & Carbide Grinder. Draw Indicator .001 Increments - 1.000" Total with additional points.

Includes 1 with 1 1/2" Diameter. X 3/4" Long end for shell mills of milling cutter, 1 with 2" Diameter X 2 1/2" Deep bore, 1 wit...

- 3 Jaw #1434 with #5 Taper and Chuck Key and 2 Sets of New Jaws.

with #5 Taper. With chuck key and one set of new jaws.

, Milled on bottom for keys 2 bars each for various Diameters. Note: 2 Blocks and 4 Bars.

3 PH, cat. No. 30T6H, KVA 30, H.V. :480 H.V. Amps 36. H.Z.:60% IZ: 6.1 L.V.:240 L.V. Amps 72 Weight 260LBS Class AA Style 33349-28212-024

Cincinnati

Cincinnati

single PH

100-400 degree's 120V 1250Watts with approx 10lbs + of dip seal plastic.

with anvil, chain-saw barrail closer. 3 bar-rail spacers to verify bar-groove width.

Hollow Grinder, Sharpener, honer.

For finish grinding of sharpened tools.

3 PH

Foot operated Hand saw setter. Model 381.

Manual Hand Strike Saw Setter, Saws up to 38" in size.

Hand operated Saw Setter

3/16" by 1" Flat Stock, 1/4" round.

with 1 1/4" to 3" Pittsburgh compact dies, 7 in all. Sharp 90 degree bending attachment, steel twisting attachment.

With 4 indexing plates. With spacing from 24 to 66.

30-355 Maximum amps on wheeled cart.

Satin chrome finish, Hardened stabilized master bar with case. Starrett #708-0-5-0 indicator. .0001 inch indicator.

1/16" to 1/2" diameter capacity. 3PH

Automaitc Retoother for hand-saws with additional new spring holder. Single Phase.

Automatic Retoother for hand-saws. Single PH.

Chain saw chain grinder model 399

Chain saw chain grinder model 399 Single Phase

Chain saw chain grinder, Single Phase

17 rings. Numbers: 3,4,5,6,8,(2) 12, 10,14,16,18,(3) 24, 75,84,88

with 1/2 " to 5/8" collet 5/8" to 3/4" collet, 3/4" to 7/8" collet, 7/8" to 1" collet, 1" to 1 1/8"...

1" Belt Sander

Includes Stand.

Includes Assorted used grinding cut off and cup wheels.

3PH Includes 2" riser plate.

3PH Includes 2" riser plate.

3PH Includes 2" riser plate.

40 lb capacity. 1/4" ceramic nozzles. Includes light and additional exterior florescent light. Additional ceramic nozzles included. Like new!

With green wheel and diamond wheel mounted. 1/2 HP motor

3PH. 3 HP motor.

Additional Brand new 14" Gemini cut off wheel included. 3 PH.

3PH 1 1/2 hp motor

9" intake and exhaust. 7" wide X approx 28" bell housing, with 5 hp motor. With faifnir bearings.

with standard equipment. With universal radial cutter grinding fixture No. 6. For grinding ball nose inmills, forming radius shell mills, inmills and

Hollow grinds.

With flap wheel and abrasive wheel.

for hand saws and fine tooth circular saw blades. 4 pt to 16 pt saws.

Foot Operated. For setting hand saws and fine tooth circular saw blades. 4 point to 16 point saws. Includes setting gauge.