B & K Industrial Tool Grinding LLC

Thread Micrometer. 0-1" Diameter w/ 64ths marking of body of gage in wooden box.

Set of Center to Center Fixtures - 2 pieces included.

3 Jaw #1434 w/ #5 Taper & Chuck Key.

w/ 6 rods 0"-6" in wooden case.

Precision #5 Taper Chuck w/ 4 location Adjusting Screws to Adjust true poition w/chuck key.

Jaws 2 7/16" wide X 1 1/2" Deep. Max. opening 2 11/16"

Standard and Stub. 15 Pieces.

Drive Pin Grinding Fixture/Dual-Angle for 5,7,9,17 & 20 mm pins & 13mm pin. For 1/2",3/8", and 1/4" Diameter pins.

3 Jaw Chuck #19575 w/ #5 bolt on (3 Bolts) Head with chuck key.

2-#410-1003, 1-#320-5415, 2-#401-2002, 2-#320-4413, 2-#320-2208, 1-#401-6004,1-#320-3310, 1-#320-7427, Maze Holder #424-1170

Jaws 2 7/16" wide X 1 1/2" Deep Max openning 2 11/16". Note one ear broken

w/ straight bar in case. One starret Back - Plunger Dial test indicator No. 196B-1 in box. One starret No. 57 Test Indicator Holder with Shaft.

left 0 to 50 degrees right tiltable 0 to 50 degrees, with 3 T-Slots and Rotating Handle.

Used on 310-16 Steel & Carbide Grinder. Draw Indicator .001 Increments - 1.000" Total with additional points.

Includes 1 with 1 1/2" Diameter. X 3/4" Long end for shell mills of milling cutter, 1 with 2" Diameter X 2 1/2" Deep bore, 1 wit...

- 3 Jaw #1434 with #5 Taper and Chuck Key and 2 Sets of New Jaws.

with #5 Taper. With chuck key and one set of new jaws.

, Milled on bottom for keys 2 bars each for various Diameters. Note: 2 Blocks and 4 Bars.

3 PH, cat. No. 30T6H, KVA 30, H.V. :480 H.V. Amps 36. H.Z.:60% IZ: 6.1 L.V.:240 L.V. Amps 72 Weight 260LBS Class AA Style 33349-28212-024

Cincinnati