B & K Industrial Tool Grinding LLC

5'' to 44". Blades can be rotated 0 to 45 degrees left and right. Pitch 0- to 30 degrees adjustable left and right. Single PH. With adj...

Blades up to 42". High pitch 15 degree to right 30 degree to left. Sharpens these style blades: Rip saw, Cross cut, Combination, Skip tooth, 2 ...

with brand new in the box set of replacement wheels. New front cover. Sharpening stand.

3 PH

mounted on table (24" X 48") with 0 to 100 federal dial gauge .001 inch increments.

with 4 steel legs. 32 1/4" high

with holders and stand/cabinet

with stand (Medium tanks)

100 to 700 inches per minute wire speed. On stand with spool holder. Ground wire and tweco mig gun. 3 PH.

Lincoln Electric LN-7 GMA Control. 100 to 700 inches per minute wire speed. On stand with spool holder. Ground wire and tweco mig gun. 3 PH. On stand

3PH

3PH

with vice and 0 to 1/2" chuck. #2 morris taper holder. 3 PH. 300-2000 RPM . Model 1200

Sharp all, chainsaw sharpener attachment

Sharp all, chainsaw sharpener attachment

Sharp all saw and tool grinder, with additional adjustable work table and clipper grinder attachment. 12" planner blade knife guage and 6"...

Sharp all saw and tool grinder, with additional adjustable work table and clipper grinder attachment.

with lapping capabilities.

10 band saw blades and worklight Several brass replacement blade guides.

Includes 2 holders, standard drill bit, number drill and letter drill golders with cabinet. Single PH.

18" Center to Center. 3 PH. 3 1/2" diameter maximum swing.

3PH Indexing table 45 Degree left and right. Rotating head. Forward and reverse dual head spindle. Auxilary power plug. Belt drive.

3PH Indexing table 45 Degree left and right. Rotating head. Forward and reverse dual head spindle. Auxilary power plug. Direct drive.

3PH Indexing table 45 Degree left and right. Rotating head. Forward and reverse dual head spindle. Auxilary power plug. Belt drive.

3PH Indexing table 45 Degree left and right. Rotating head. Forward and reverse dual head spindle. Auxilary power plug. Belt drive.

Grind 1/8" to 9/16" drill bits. Adjustable 90 to 180 degrees.

Bandsaw adapter. 1 straight, 1 crown and 1 back or mitre carrier kit. Fine toothed circular saw adapter.

Bandsaw adapter. 1 straight, 1 crown and 1 back or mitre carrier kit. Fine toothed circular saw adapter.

Bandsaw adapter. 1 straight, 1 crown and 1 back or mitre carrier kit. Fine toothed circular saw adapter.

Air Operated with collets from 1/4" to 1 1/2" Diameter.

Air Operated with collets from 1/4" to 1 1/2" Diameter.

180 Dgree indexing, Swivel base, motor drive with 5-C precision collet cpacity with extension bars for between center grinding 4" diameter , ad...

3 PH - 3/4'' Diameter to 3" capability - 80 - 160 degree angle with coolant. Rebuilt Chuck.

3 PH - 3/4'' Diameter to 3" capability - 80 - 160 degree angle with coolant. Air Regulator and filtration system replaced.

3 PH - 3/4'' Diameter to 3" capability - 80 - 160 degree angle with coolant.

With tilting head and accessory tool electrical ports. Swivel Table 45 degree left and right. 3 PH.

Saw Grinder. Single PH For Carbide, steel and cold saw blades

With Drill Holders, Collets, With split point attachment and several grinding wheels and storage cabinet.

Drill grinder with standard collets and tool holders with cabinet and vacum sys. With 3 brand new holders.

Includes Bridgeport head and Cincinnati Vertical Milling Head. 3 PH - Vertical and Cross Feed- with Arbor and Arbor support - R8 collets - 4 Tool Hold

15 HP 2 stage -175 p.s.i.

Lathe with taper attachment - 5 feed dogs - 15" - four jaw churck (Jacob spindle nose lathe chuck), steady rest, flat live center chuck

Model 818 AHD - 3PH