Weekly Tooling/Metalworking Auction 9/7/16

SPI 4-Way V-Blocks M/N:91-294-9 Length: 4" Height: 4" Width: 1-5/32" V Openings: 7/8", 1-1/4", 1-5/8", 2" ...

SPI V-Block 2.5" V-Slot, 5" x 3-1/8" x 2" P/N:63-395-8 Quantity Bid: 2 X Amount = Total

Champion Carbide Tipped Annular Cutter, 1-3/8" M/N:CT150-1-3/8

Hanita 4 Flute End Mill, 1/2" x 1/2" x 1-1/4" x 3-1/4" M/N:TF120513005 Add#:2838450

New Niagara HSS 4 Flute End Mill, 1/2" EDP#:88329 Dimensions:1/2 x 1/2 x 2 x 4

Niagara HSS 4 Flute End Mill, 5/8" EDP#:88332 Dimensions:5/8 x 5/8 x 2-1/2 x 4-5/8

New Niagara HSS 4 Flute End Mill, 3/8" EDP#:88325

Wilson Tool Fabrication Punches, 3 Total Sizes:.281", .113", .094" Quantity Bid: 3 X Amount = Total

Lot of Pneumatic Line Blow Gun Attachments

Bridgeport No. 2 Adjustable Boring Bar Head, 5/8" On a #30 NMTB Tool Holder

Jacobs No. 14N 3JT Ball Bearing Super Drill Chuck Cap- 0-1/2", 0-13mm On a #30NMTB Tool Holder

#30 NMTB End Mill Holders, 1/2", (2) 5/8", 3/4", 7/8" Quantity Bid: Amount x 5 = Total

#30 NMTB End Mill Holders, (3) 3/8", 5/8", 3/4" See pics for part numbers Quantity Bid: Amount x 5 = Total

#30 NMTB End Mill Holders, (3) 3/4", 1/2" See pics for part numbers Quantity Bid: Amount x 4 = Total

#30 NMTB DA180 Collet Chucks See pics for part numbers Quantity Bid: Amount x 6 = Total

#30 NMTB DA300 Kennametal Collet Chuck P/N- QC30DA308162, 8233CL7

RigiBore UFP-0690 Ultra Fine Precision Boring Cartridges .005 mm/Div On Diam 12 Total **Only 3 of the units have the UFP-0690 number on them*

Lot of Used Hole Cutters Sizes: 3.25", 3.5", 3", 2.25", 2.5", 1.25", 2", 1.5", 1 3/8" Shaft Diame...

Gibraltar Products Machine Tie-Down Set, Complete

Lot of Assorted Sized Step Blocks

4 Step Blocks, 5.25" x 3.5" x 1.5"

Large Lot of Hold Downs, Step Blocks, Bolts, ETC. Dimensions of Bin:15" x 9.5" x 6"

Large Lot of Assorted Tiedown Screws

Albion 6" Casters, 2 Swivel, 2 Permanent Mounting Plate- 4.5" x 4" QUANTITY BID: 4 x Amount = Total

V-Block Hold Down Unit Excluding Hold Down:8" x 2-1/8" x 1-11/16"

Machining "U" Clamps, 3 Total 12" x 2-3/4" x 1-5/16"

QuickChange Master Jaws, M/N:QMJ8000 Length:8.120" Width:1.105" Height:2.230" See Website for more info! http://catalog.te-co....

Vise Jaws, 4 Total Dimensions:8" x 2-3/16" x 1-1/16" Hole Spacing:4-3/4" Quantity Bid: 4 X Amount = Total

Vise Jaws, 4 Total Dimensions:8-5/32" x 3.5" x 1-5/32" Quantity Bid: 4 X Amount = Total

Machine Cast Iron Leveling Pads, 3.5" x 3.5" x 1.25" 6 Total

Machine Steel Leveling Pads, 3.75" x 3.75" x 1" 8 Total

Machine Leveling Pads with Rubber and Steel Plates 10 Machine Pads- 4.25" x 1.25"

Grinding Wheel Couplings, 7" Across x 6.5" Tall Has tapered through hole: Starts at 4 7/16" tapers to 2 1/4" Also includes...

Lot of Misc Grinding Wheels, 3" to 6.5" Wheels 14 Total

Radiac 3.5" Diamond Grinding Wheel, ASD150 P/N- ASD150 R75 B46 1/16, F5096

Indexing Gears for Grinding? Center Hole- 1.5" Diameter 5 Total

Square Tech Machining Blocks, See Description for Sizes (1) 2.5" x 4" x 3/4" (Pics 2 & 3) (2) 4" x 4.5" x 3/4"...

Spec Tool Precision Carbide Inserts, L-166-L-3AL-160 30 Total

Chiron Tension Springs, B0.522.113.20.01 5 Springs Total

Scully Jones ER25 Collet Chuck, 1" Shank P/N:05222

Lyndex ER16 Straight Shank Extension Collet Chuck M/N:E16-EXT

Iscar Mini Flat ER16 Collet Chuck M/N:ST5/8X1.250 Add#:4569549

Vektek Rocker Arm Attachments, 6 Total P/N:91-5205-08

KCM 12" Soft Top Chuck Jaw Set, 6" x 4" x 2" P/N- KKC012LSE

H & R Soft Top Chuck Jaws, 6.5" x 2.5" x 5" There are 2 Sets of 3 Jaws, 6 Total P/N:115 50 Quantity Bid: 2 X Amount = Total

Chuck Jaws NO Mfg. 3.5" x 2-1/8 x 1-3/16"

Kalamazoo Chuck Manu. Steel 3 Jaw Chuck Set, SKKWA15 Dims- 12-3/4" x 7" x 2-1/2"

Riten Half Offset Drive Pins #:P4704 10 Total

New Riten Half Offset Pins, P/N- P4704, 8 Total **Seals on boxes are still intact, opened one to get pics**

Turret Boring Bar Tool Holder, 2" Capacity Numbers on back plate: 3664424 R2, M0173A Overall: 3.5" x 3.25" x 5.5" Bolts H...