Weekly Tooling/Metalworking Auction 3/23/16

Lot of (4) Woodhead 5266 Connector, 15A, 125V, NEMA 5-15P

Lot of (12) Buss JT60060 Fuses

Lot of (29) Buss JT60030 Fuses

Mitsubishi NF225-S Circuit Breaker

Lot of Assorted Allen Bradley Contactors

Nemic Lambda Power Supply

Lot of Assorted Siemens Contactors, Breakers and Misc

Mitsubishi NF225-S Circuit Breaker

300 Amp Siemens JXD63B300 Circuit Breaker

300 Amp Siemens JXD63B300 Circuit Breaker

Eaton DH361UGK Disconnect Box

Lot of Assorted Numatics

Lot of Assorted Limit Switches

Lot of Assorted Photo Eye, Sensor and Patch Wires / Cables

Yaskawa CPS-15 Power Supply

Yaskawa CPCR-MR 082GB Servo Drive M/N was found on circuit board

Yaskawa CPCR-MR 152GB Servo Drive M/N was found on circuit board

Yaskawa JANCD-G10 01 Board, DF7000063, Rev C

Yaskawa JANCD-GFL01 Board, DF6101391, Rev B

Sanyo A7-1-20050-1B Board

Yaskawa Cup Motor, UGCMEM-15-MC54 See pics for complete motor specs Motor is dirty! **Unsure of working condition**

Dreisilker Electric Motor, No main tag

Gong TZYH 1/2HP Speed Reducer

Sanmei D.C. Servo Motor, Info is not readable

Greco Systems CNC Minifile, M/N- P-XT P/N- 5164 Volts- 115 S/N- B7MB33 Hz- 47-63 **Unit was plugged it and power turns on!**

Wyler 12" Spirit Level, 53-422-555 1 Div= .0005"

Wyler 8" Spirit Level, 53-422-525 1 Div= .0005"

Carol 16 AWG MTW Blue Wire Spools P/N- 76512.18.07 (4) Blue 500' Wire Spools QUANTITY BID: Amount x 4 = Total Bid Price

Carol 16 AWG MTW Blue Wire Spools P/N- 76512.18.07 (4) Blue 500' Wire Spools QUANTITY BID: Amount x 4 = Total Bid Price

Helicoil Metric Master Thread Repair Kit, M12X1.75 Size- M12X1.75 P/N- 5403-12

Lock-out/Tag-Out Safety Bag, Cat#- 65780 2 Bags Total

Adjustable Machine Light Fixtures QUANTITY BID: Amount x 2 = Total Bid Price

Adjustable Machine Light Fixture

Clapp Dico 3" Face Mill, SF-03-08-RH Additional Number- 2.000 S.H. 1" Diameter Center Hole, 3/8" Key Ways

8" Face Mill, No info on unit Has 12 Inserts Center Hole- 2.5" Key Ways- 1"

Lovejoy Tool 8" Face Mill, 8NXRU-15 Center Hole- 2.5" Key Ways- 1"

Carboloy 4" Indexable Slot Milling Cutter with Holder Cutter- Carboloy- R335.19-04.0008B.2, Center Hole- 1" Key Ways- 3/8" Hold...

Sandvik Coromant 4" Face Mill, hRA262.2-100M Key Ways- 5/8" Center Hole- 1.25"

Graflex A700 30 Fine Boring Head, 1.535"-2.010" 0.1, .004" Resolution Shank- 11/16" Key- 5/16"

Graflex A700 30 Fine Boring Head, 1.530"-2.000" 0.1, .004" Resolution Shank- 11/16" Key- 5/16"

Kennametal KSOM 1.5" Face Mill, 1.25" Shank P/N- KSOM1500F5345F5 16,710 MAX RPM

1" Lathe Tool Holders (2) Iscar MWLNR 16-4 (1) Sandvik SDPCN-16 3C (1) Mitsubishi? MVJNR-163, IVSR-322, TC-251, NL-34L, STC-11 QUANTITY...

Greenleaf 1.5" Grooving Lathe Tool Holder **The Following info was found online** Item Details Part Number : 411161-3VRS Gage Insert : **...

1" x 1.5" Carboloy Lathe Tool Holders (1) MDJNL-86-5 (1) TC-45885-B, 635 I.C. Only QUANTITY BID: Amount x 2 = Total Bid Price

Greenleaf SNGN-634 T2A Inserts, 31 Total Additional Numbers- ISO: SNGN-190416S **Seals are broken on cases, inserts appear to be unused**

Kennametal Boring Head, H24-NDXPR4W NI6

New Valenite Insert Cartridges, VPB 2313-C05

KM50 Kennametal Grooving Insert Holders, 1003615R01 2 Holder Total Additional Number- 8983CA9 **Cannot read any numbers on one of the holders

KM50/VM50 Carbide Insert Tool Holders **Missing hold down screws** **When looking at the side with carbide insert (pic 1), all inserts point to th

KM50/VM50 Carbide Insert Tool Holders **Missing hold down screws** **When looking at the side with carbide insert (pic 1), all inserts point to th

End Mill Holder Attachments, 3/8", 1/2", 1.25", 1.5" 3/8", 1/2", & 1.25" has a 2" Diameter Shank 1...

Shell End Mill Holder Attachment, 1/2" Keys, 1.25" Arbor No numbers on unit Shank- 1" Diameter, 2.5" Length

New Micro Slides, Micro Slide, M/N- A-3030-PE Dims- 3" x 3" x 1.25" Slides 1" over center both ways **Originally wrappe...

Micro Slides, Micro Slide, M/N- 118-2 Overall- 2.25" x 1.5" x 5/8" Slides .75" both ways from center

Cleveland 15" Linear Guides, R-6400 **Found one after pics were taken, there are 3 total** QUANTITY BID: Amount x 3 = Total Bid Price

Rexroth Roller Linear Guide, R185952040 Appears to be new! Number stamped into base- AL TX 24 5 Additional Number- 587 (7210) Overall- 8.5...

Valenite Quick Change Tap Adapters, 321-5-214-TNC Additional Number- 0906/6228 3/4" Cap Shank- 7/8" Diameter (From top of thread to...

Carr Lane Swivel Hoist Ring, CL-7000-SHR Number on nut- 91-0388

Taft-Deirce Right Angle Plate, No. 201 Overall- 2.5" x 5.75" x 12.5" Base Plate- 2.5" x 5.75" x 7/8" Front Plate-...

Tinius Olsen Caliper, S.O. 77027 Appears to be missing one of the points on the caliper, see pics

Federal Dial Indicator, LT-10, .0005" Resolution

0"-1" Micrometer, .0001" Resolution

New Magnetic Base for Indicators No Part number on unit Base Dims- 2.25" x 2" x 2.25" Approximate Height- 13"

Storch Magnetics, Magnetic Clean Up Unit Magnetic area- 4" x 2.5"

Brown & Sharpe 8" x 4" Magnetic Chuck, No. 408 S/N- 246 Overall- 8" x 4" x 3.5"

Suburban Tool 6" x 3.25" Magnetic Chuck M/N- MC-36-FP S/N- 3 Overall- 6" x 3.25" x 2.5" **Requires a 3/8" Al...

Parallel Set, BOR003021 From 1/2" - 1 5/8" **Set appears to be missing a few pieces, also not sure if parallels are in the correct s...

Bridgeport No. 2 Adjustable Boring Bar Head, 5/8" Boring Bar Cap- 5/8" Shank- Straight, 1.25" Diameter

Everede Tool Adjustable Boring Head, No. 4-50 Boring Bar Cap- 1.25" Shank- Straight, 2" Diameter

Boring Bar Head, Holds Triangle Shaped Bores No info on unit Shank- Straight- 1.25" Diameter **The last picture is the type of boring to...

Willey Boring Bar Head, 1/2" Capacity P/N- WS-615 **the "6" could be a "0" or an "8", only bottom half of numb...

Jacobs 14N 3JT Ball Bearing Super Chuck Drill Chuck Shank- #2 Morse Taper Cap- 0 - 1/2", 0-13mm

Drill Chuck, 0-1/2" No manufacturer info M/N- 40-312 **Chuck doesn't say what the capacity is, measured to 1/2" max** With Ke...

Jacobs No. 32 Ball Bearing Drill Chuck Cap- 0 - 3/8" Shank- 5/8" Diameter, 1" Length

Jacobs SM4G61 3/8-24 THD Drill Chuck 1/16-3/8", 1.5mm-10mm Capacity

Erickson DA180 Collets, 20 Total

Erickson DA200 Collets, 30 Total

Kennametal DA300 Collet Chuck, SS050DA304681 Shank- 1/2" Diameter, 5" Length With 22 DA300 Collets

DA200 Collet Chuck, 3/4" Shank Shank- 3/4" Diameter, 3.25" Length With 30 DA 200 Collets

Series 100 AF Collets, 15 Total

TG100 Collets, 10 Total

Series 50 AF Collets, 15 Total

ER32 Collets, 14 Total **Dirty**

New Nikken NK 7/8 Collets, 6 Total **5 of the collets are still in plastic bags** (3) 5/16" (2) 1/4" (1) 7/16"

Series 50 AF Collet Chuck, 1" Shank With 10 Series 50 AF Collets

DA180 Collet Chuck, 1" Shank Shank- 1" Diameter, 3" Length With 15 DA 180 Collets

3.25" x 2" x 1" Machining Blocks Bolt Holes- 19/32" Center to Center QUANTITY BID: Amount x 4 = Total Bid Price

TM Smith Tap Adapter 52-010-0 Shank Cap- 1/2", End of tap cap (Square part) 3/8" Shank- 1.25"

New Superior Shur-Kut Straight Cartridge Rolls STCR 1/2 x 1 x 1/8 120AO RPM: 26000 P/N- 11885

#40 NMTB End Mill Holders, 3/16", 5/8", 3/4", 7/8", 1", 1.25" **Units are worn, rusty** QUANTITY BID: Amount x ...

#40 NMTB Shell End Mill Holders (1) 1/2" Keys, 1.25" Top Shank, No Hold down screw (1) 3/8" Keys, 1" Top Shank, No hold down...

#50 NMTB Shell End Mill Holders, 5/8" Keys QUANTITY BID: Amount x 3 = Total Bid Price

CAT50 Sandvik Varilock Holder with Boring Bar Head Holder- Varilock- 391.37-16 50 095 Boring Bar, 0.02mm Resolution, 5/8" Cap

CAT50 Lyndex Shell End Mill Holder, 5/8" Keys Arbor- 1.5"

CAT50 TG100 Collet Chucks See pics for P/N's QUANTITY BID: Amount x 3 = Total Bid Price

CAT50 Univeral Acura Tap Collet Chuck Holder- AT914007

CAT50 Briney ER32 Collet Chucks, V50BR-32-400S QUANTITY BID: Amount x 3 = Total Bid Price

CAT50 End Mill Holders, 3/8", (2) 1/2", 5/8" See pics for P/N's QUANTITY BID: Amount x 4 = Total Bid Price

CAT50 Universal Extended End Mill Holder, 3/4" Holder- 464982 Extends 9"

CAT50 End Mill Holders, (2) 3/8", 1/2", 1" See pics for P/N's QUANTITY BID: Amount x 4 = Total Bid Price