Weekly Tooling/Metalworking Auction 9/14/16

Hydraulic Tailstock 10.5" Center Height Quill Travel Length:3" Base:9" x 6-3/8"

End Mill Cutter Sharpener Stock #:235-004 Lumco#:ALS7058DET37 Base Dimensions:9.25" x 6" Mounting Holes:7.75" x 5"

Right Angle ER32 Collet, Right Angle Milling Heads Has "EXT. Coolant" on tag Overall- 10" x 5.5" x 9" Quantity Bid...

ER32 Collet Chuck Milling Heads Overall- 5.5" x 7" x 7" Quantity Bid: Amount x 2 = Total

Reelcraft Industries Air Hose Reel, With Stand M/N- 4435-OLP Overall Height (w/ Stand): 34" **Dirty**

Aluminum Safety Fencing with STI Safety Switch Safety Switch on Doors Overall- 61.5" x 18" x 37"

BT50 Briney 1.5" End Mill Holder/Tapping Chuck M/N:BT50-THM-150

Trudex/ESA VDI-50 Lathe Tool Holder Block P/N:214 100 260 Capacity:40mm

Parts Cleaner Tank with Drain Valve, Tank- 25" x 13" x 7" Includes Rolling Stand! Overall- 24" x 17" x 35"

Pneumatic Dual Vise Unit, with Shutoff Valve Decoupler Valve Decoupler- Vektek 56-0001-02, 3105 Number etched into vise unit- 7N-5874, OP#65 Ov

Duplomatic Piston Pump/Motor Assembly M/N:PVD 28 H/30 28L/min 1450g/min Leroy-Somer Motor:LS 100 L2 543201 See pic for specs

Hydropump 1HP Pump Assembly, M/N- 500-1 Dayton Motor- M/N- 6K690A, Volts- 115/230

Beaver Morse Taper #5 Shell End Mill Holder No.19-24 1-1/2" Arbor 5/8" Keyways

Morse Taper #0 Holders, 12 Total

Morse Taper #1 Adapters

Morse Taper #2 Adapters

Morse Taper #3 Adapters

Morse Taper #4 Adapters

Morse Taper #5 Adapters

Morse Taper #1 Floating Holders P/N:1-B-1

Accupro MT4 Tanged 1.5"-18 Boring Head Sank P/N- 05206347, 126.33404837

Morse Taper 5 to Jacobs Taper 4 Unit, MT5JT4

(2) #2 Morse Taper to #2 JT, (1) #3 Morse Taper to #3JT

F&D Expansion Reamers, 2 3/8", 2 1/2" Quantity Bid: Amount x 2 = Total

Lot of Misc Sized Expansion Reamers, 11 Total Ranges from 7/8" to 1 3/8"

Lot of Misc Sized Expansion Reamers, 16 Total Ranges from 1/2" to 1 1/16"

Lot of Misc Sized Expansion Reamers, 8 Total Ranged from 1" to 1 13/16"

Lot of Misc Sized (Small) Straight Shank Reamers Largest Size: 3/4" 35 Reamers Total

Large Lot of Straight Shank Reamers **Some of the reamers has a tapered reamer** 15 Total

Large Lot of #1 Morse Taper Reamers, 100+

Large Lot of #2 Morse Taper Reamers, 70+

Large Lot of #3 Morse Taper Reamers, 30+

Lot of #4 Morse Taper Reamers, 16 Total

Sandvik 2.5" Shoulder Face Mills, 18mm Arbor M/N:RA290.90-063R19-12M M/N:RA290-063R19-12M Quantity Bid: 2 X Amount = Total

Futurmill 6-1/8" Face Mill, 50mm Arbor, 20mm Keyway M/N:ZN3M-0608-R.H.

LTC 3" Face Mill, 25mm Arbor, 10mm Keyway #:3-OCJAR4 #:L-1965

Kennametal KTAL-854C Indexable Tool Holder 1-1/4" Shank

Kennametal KTFL-854C Indexable Tool Holder 1-1/4" x 1-1/2" Shank

Manchester O.D. Right Angle Grooving Tool Holder M/N:204-215 Depth of Cut:5/8" Shank:1.5" x 1.25"

SECO/Kennametal Endexable Tool Holders, 1" Shank Kennametal M/N:KTGL-163C SECO M/N:CGIR 100 03D-R4.00 2.75 Cut Width:3mm Cut Depth:9mm ...

Kennametal Indexable Tool Holders M/N:CTEPR-854D NG8 1.25" x 1" Shank M/N:CSDPN654 NH8 1.25" x .75" Shank Quantity B...

Carboloy Systems Indexable Tool Holder M/N:MVJNR-20-4 D 1" x 1-1/4" Shank

SMC Pneumatic Actuator M/N:CDM2RA25-125 Full M/N:CDM2RA25-125-H7BL

Festo Pneumatic Actuator Typ:DSM-32-137-PPV-A

Panasonic Motor, 4 Phase 100W M/N:M91CA0G4L1

Lu Yang Induction Motor, 25W M/N:4IK25GN-Y

Oriental Motor Induction Motor, 25W M/N:4IK25GN-ACH-115

Asco Tri-Point Pressure Switch, HZ19B017003

Idec Emergency Stop Button Assembly Conduit is approx 10' long

Hevi-Duty .095KVA Industrial Control Transformer Cat#- E09511PBX See pics for complete specs!