Weekly Tooling/Metalworking Auction 7/5/17

Brown and Sharpe CMM

Large 110 Gallon Fire Safety Cabinet, 59" x 34" x 64" Has One Shelf Has Rollers on bottom of cabinet Has Paint on Cabinet...

Large 110 Gallon Fire Safety Cabinet, 59" x 34" x 64" Has One Shelf Has Rollers on bottom of cabinet Has Paint on Cabinet

New Monaghan 56.350mm Carbide Tipped Reamer Heads CAT# 3484-2564REL Type: 34093 56.350 +/-.010 (CD= 56.355 +/-.001) Shank: 7/8" x 1.5&q...

Ingersoll Max-I-Cut 2.5" Indexable Mill, P/N: 600B25R02 Shank: 1.25" x 2.25" Quantity Bid: Amount x 3 = Total

Ingersoll 2.5" Indexable Mills, See Desc for Info (4) 600-B 2.5DIA (4) No info Shank: 1.25" x 3.25" Quantity Bid: Amount x...

2.5" Indexable Milling Units, No info Shank: 1.25" x 2" Quantity Bid: Amount x 3 = Total

6" Indexable Roughing Side Milling Cutters, Insert: SNW-64 Thru Hole: 1.5" Key Way: 3/8" Quantity Bid: Amount x 4 = Total

Large Valenite 5.75" Milling Cutters, P/N: SRN 575-4R16-200F Arbor Hole: 2" Key Ways: 3/4" Overall: 5.75" X 5.75" X ...

Valenite 3.25" Milling Cutters, P/N: SRN340-4R12-150F Arbor Hole: 1.5" Key Ways: 5/8" Overall: 3.25" x 3.25" x 2.5&quo...

3" Indexable Roughing Face Mills, P/N: 30 CD 300 Arbor Hole: 1.25" Key Ways: 1/2" Quantity Bid: Amount x 6 = Total

4" Indexable Roughing Face Mills, P/N: 30 CD 400 Arbor Hole: 1.5" Key Ways: 5/8" Quantity Bid: Amount x 6 = Total

4" Indexable Roughing Face Mills, P/N: CD 400 Arbor Hole: 1.5" Key Ways: 5/8" Quantity Bid: Amount x 6 = Total

Milling Specialties 2.5" Indexable Rougher End Mills, P/N: PC25242Q Shank: 2" x 3" **Only 7 pictured, there are 8 total!** Q...

Milling Specialties 2.5" Indexable Rougher End Mills, P/N: 020212 Shank: 1.25" x 2" Quantity Bid: Amount x 4 = Total

New Seco Coolant Thru 2.5" Indexable Mill, P/N: EX-1501-900-213 Shank: 1" x 2"

Wolseley 1.25" Boring Bars, P/N: EG43 Length: 4.5" Quantity Bid: Amount x 3 = Total

1.5" and 1.75" Valenite/Carboloy Boring Bars, See Desc for Info (1) Valenite 1.75", P/N: BHP-NV-110-LH, Missing insert clamp (1) ...

Misc 1.5" Boring Bars, See Desc for Info (1) Sandvik R166.0KF-D??? (1) Valenite GTB-175 (1) Valentie PGTBR-173-43C, Coolant Thru Quanti...

Sandvik 2" Boring Bar, P/N: RSMBN 32.5 Overall Length: 12.5"

1.25" and 1" Boring Bars, See Desc for Info (1) Ceratip, 1.25" P/N: STGIVR-20-21 (1) 1" No info Quantity Bid: Amount x 2...

New Sandvik 1.5" Lathe Tool Holder, P/N: BPGR 50024 K5M

Sandvik 1.25" Lathe Tool Holders, P/N: BPGL 50024 **One of the holders is missing an insert set screw** Quantity Bid: Amount x 2 = Total

New Kennametal 1" Lathe Tool Holder, P/N: 234654R01 Additional Numbers: 0616CH5, 6316-5952CHGA

Kennametal 1.25" Lathe Tool Holder, P/N: 6354-6142CHGB NA2 DWG1611222

Valenite 1.5" Econ-o-Groove Lathe Tool Holders, P/N: VHDBSN-24 Quantity Bid: Amount x 4 = Total

Valenite 1.5" Indexable Lathe Tool Holders, See Desc for Info\ (4) SD-TMR-24-4 (1) MTFNL-24-5 (5) MSKNL 24-6D Quantity Bid: Amount x 1...

Valenite 1.5" Indexable Lathe Tool Holders, P/N: LTBR-24 Quantity Bid: Amount x 8 = Total

Valenite 1.5" Indexable Lathe Tool Holders, P/N: LTE-24 Quantity Bid: Amount x 6 = Total

New Kennametal 1.25" Indexable Lathe Tool Holder, P/N: 6332-2162CHGC DWG WB68634R02, 111972089L2CV

Sandvik 1.25" Indexable Lathe Tool Holders, P/N: L150.21-20-6 Quantity Bid: Amount x 8 = Total

RTW 1" Indexable Lathe Tool Holders, P/N: MCRNL-16-4 Quantity Bid: Amount x 10 = Total

Misc 3/4" and 5/8" Indexable Lathe Tool Holders, See Desc for Info (5) Valenite 3/4" P/N: SVWR-12C (2) Sandvik 3/4", P/N: CT...

Misc 1" x 1.5" Indexable Lathe Tool Holders, See Desc for Info (1) Valenite SVTFL-86C (1) Valenite SVAL-86 (1) Valenite SVTFR-86 (1)...

Misc 1" x 1.5" Indexable Lathe Tool Holders, See Desc for Info (2) Valenite SVTFL-86C (3) Sandvik MTRNL 86 5E (1) Valenite SVAR-86C ...

TRW 3/4" x 1.5" Indexable Lathe Tool Holders, P/N: CTCON-66-4 Quantity Bid: Amount x 6 = Total

Misc Kennametal KM50 Shank Tools, 14 Total **Some units missing set screws** Quantity Bid: Amount x 14 = Total

Misc Kennametal KM50 Shank Tools, 12 Total **Some units missing set screws** Quantity Bid: Amount x 12 = Total

Misc Kennametal KM50 Shank Tools, 17 Total **Few units missing set screws** Quantity Bid: Amount x 17 = Total

Misc Kennametal KM30 Boring Heads, 3 Total No numbers visible Quantity Bid: Amount x 3 = Total

NMTB40 Misc Tool Holders, 11 Total Units are all missing lock nuts Quantity Bid: Amount x 11 = Total

NMTB30 Misc Tool Holders, 14 Total Units are all missing lock nuts Quantity Bid: Amount x 14 = Total

NMTB40 Kennametal 2" Milling Arbor, P/N: 1055662R00 Additional Numbers: 5695CG5

Sandvik TNS Tuneable Boring Bars, P/N: 56991-010-01 Shank: 470-3 25250, 1" x 5" Quantity Bid: Amount x 4 = Total

DA200 Collet Chucks, 3 Total Shank: 3/4" x 5" Quantity Bid: Amount x 3 = Total

DA100 Collet Chucks, 2 Total Shank: 1" x 2.5" Quantity Bid: Amount x 2 = Total

TSD Univeral 3/8" Acura Flex Collet Chuck, P/N: 90397 Shank: 3/4" x 3"

Sandvik C3 Collet Chuck, P/N: S8-6-C3NFM Shank: 1" x 5"

DiHart Rapid Reamer Tools, P/N: 540.56.005 0.9450" - 1.1850" Shank: 1" x 2.25" Quantity Bid: Amount x 7 = Total

DiHart Rapid Reamer Tools, P/N: 540.13.004 0.732" - 0.945" Shank: 3/4" x 1.75" Quantity Bid: Amount x 13 = Total

DiHart Rapid Reamer Tools, P/N: 540.13.002 0.4958" - 0.6138" Shank: 5/8" x 2" Quantity Bid: Amount x 9 = Total

Jacobs A0206 Arbor Units, #2 Morse Taper to 6 J.T. Quantity Bid: Amount x 3 = Total

New Morse INT 3/8-18 NPT TPR Pipe Taps Quantity Bid: Amount x 6 = Total

New Emuge Standard Taps, See Desc for Sizes (2) 1/2 - 14 NPSF-X (18) 3/4 - 16 UNF-28X Quantity Bid: Amount x 20 = Total

New Emuge Metric Taps, See Desc for Sizes (3) M10-6H (4) M10-6HX Quantity Bid: Amount x 7 = Total

New Guhring Misc Taps, 7 Total

New North American Standard Taps, .750-16NF HS GH-5 **Some units have shelf wear** Quantity Bid: Amount x 20 = Total

Indexable Thread End Mills, See Desc for Info (1) Kennametal Coolant Thru, K075TM1RW075STN16T, Shank: 3/4" x 2" (1) No info on unit, C...

New Dihart Reaming Tool, P/N: 640.31.005 Reamax -5: 32.001 - 40.000 Anzugsmoment Max. 26Nm, FL.49583

New Dihart Rapid Reamer Tool, P/N: 540.07.005 RS Holder DAH81 30.11 - 40.00 Long

Jacobs No. 32B Drill Chuck Capacity: 0 - 3/8, THD 5/8-16

New Sandvik 1.25" Lathe Tool Holders, P/N: MCT CT-62562-SA7 Quantity Bid: Amount x 4 = Total

New Sandvik Assembly Items, P/N: 5680 065-12 Quantity Bid: Amount x 2 = Total

Lot of Misc Sandvik Items

New Sandvik Boring Heads, See Desc for Info (5) Sandvik L-13395, X002000X011582, 431-100171 L20, S.M.S. B-9194-620 (3) Sandvik L-13394, X002000X01

Misc Sized Drill Masters Carbide Tipped Gun Drills See pics for sizes! Quantity Bid: Amount x 11 = Total

Large Lot of Misc Drill Bits/Units

New Hannibal Coolant Thru Carbide Head Reamers (1) 3420-0241, 10/12 (1) 3420-0242, 10/12 Quantity Bid: Amount x 2 = Total

New Hannibal 1.75" Coolant Thru Carbide Head Reamers Cut: 1.75" Shank: 1.25" x 10" P/N: 3420-0252, 5/13 Quantity Bid: ...

New Hannibal 1-7/8" Coolant Thru Carbide Head Reamers Cut: 1 7/8" Shank: 1.5" x 10" P/N: 3420-0254 **Only 11 pictured,...

New Hannibal 1-3/8" Coolant Thru Carbide Head Reamers Cut: 1 3/8" Shank: 1" x 8.5" P/N: 3420-0245, 5/13 Quantity Bid: ...

New Hannibal 1-3/8" Coolant Thru Carbide Head Reamers Cut: 1 3/8" Shank: 1" x 8.5" P/N's (3) 3420-0246, 4/13 (6) 34...

Greenleaf 2.5" Interchangeable Boring Bar, P/N: PT88856 REV A Head and body have same numbers: 514933 DET1 PT88856 REV A

Large 2.5" Indexable Coolant Thru Drill, LOC: 13" No info on unit

Large Indexable Drills, 6 Total **Each unit is missing at least 1 insert set screw** Quantity Bid: Amount x 6 = Total

Muskegon Tool 2.5" Coolant Thru Indexable Spade Drill?, P/N: CDH-250 Shank: 2" x 4"

Alvan S.C.A.M.I Reamer Unit, P/N: 2500-MC-09968 Shank: 1" x 2" OAL: 18"

Valenite Vari-Set Boring Head Holder, P/N: BB-2D Shank: 1.25" x 10"

MAZAK Coolant Thru Boring Head, P/N: 51288016400 CAT MM

3/8" Capacity Boring Bar Holders, 4 Total

New Ingersoll Coolant Thru Indexable Mill, P/N: YC0770025RHR01 Shank: 5/8" x 1.75"

Graflex EPB Hydraulic 32mm End Mill Holder, P/N: M5832 3632 Shank: 36mm x 40mm

Devlieg Microbore Unit, P/N: SS15-60 Shank: 1.5" x 4"

Large MicroBore Units, All units missing boring head

1.5" Capacity Boring Bar Turret Tool Holders, 4 Total Overall: 4" x 3" x 2.75" Bolt Holes: 1.75" x 3-1/8" Quant...

1" Capacity Lathe Tool Holder, Turret Holders Overall: 4" x 3" x 2" Bolt Holes: 1.75" x 3-1/8" Quantity Bid: A...

Ingersoll 3" and 3.25" Indexable Milling Cutters, See Desc for Info (1) 3" Cut, P/N: 15T4H-3002586R10 (3) 3.25" Cut, P/N: 15...

Ingersoll Max-I-Cut 3" Indexable Face Mills, P/N: 26J1A3081R01 Shank: 1.25" x 2.5" Quantity Bid: Amount x 7 = Total

Ingersoll Max-I-Cut 1.5" Indexable Mill, P/N: 600B15R02 Shank: 1.25" x 2" Quantity Bid: Amount x 5 = Total

Carboloy 1.25" Indexable Mills, P/N: FEM-100 Shank: 1" x 3" Quantity Bid: Amount x 5 = Total

Valenite 2" Indexable Milling Units, P/N: SRN200-4R20-200W Shank: 2" x 3" Quantity Bid: Amount x 5 = Total

Ingersoll Max-I-Pex 2" Ball Nose Indexable End Mills P/N: 16W1B2082R03, P-85306-8 Insert: SPE-33R01, BDE323R05 Shanks: 2" x 3"...

Carboloy 2" Indexable Ball Nose End Mill, P/N: R218.19-02.00-3P-65H Shank: 2" x 3"

Ingersoll 2" Ball Nose Coolant Thru Indexable End Mill P/N: 2BW3Y-20040E4R01 Shank: 2" x 4"

Ingersoll 2.25" Indexable Coolant Thru Drill, P/N: A22505623RS1 Shank: 2" x 4"

Adjustable Coolant Thru Indexable Drills, ~2" **Cutting portion of drill can be adjusted slightly, close to 1.75" to 2" Range** ...

Madison Microller Burnishing Tools, 1" Diameter Shank: #1 Morse Taper Quantity Bid: Amount x 2 = Total

Elliott Tool 4" Roller Burnishing Tool? P/N: 5420-000-81216 Shank: 1" x 3" Quantity Bid: Amount x 2 = Total

Elliott Tool 4" Roller Burnishing Tool? P/N: 5440-000-81217 Shank: 1" x 3"

Bakuer Draw Bar Dead Centers, P/N: CM5 28-50 Quantity Bid: Amount x 2 = Total