Weekly Tooling/Metalworking Auction 11/1/17

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

*NOTE* This item is NOT at the Consignment Location. It is still in plant at separate Wyoming, MI facility. This is a PICK UP only item. The ONLY days

Donaldson Aercology Mist Collector, M/N: MDV 10 19 S/N: 49159 Voltage: 230 Amps: 2.0 HP: .5 Hz/PH: 60/3 Overall: 26" x 20" x 56&...

Donaldson Torit Mist Collector, M/N: WSO 10-1 S/N: 2390061-005 208-230/460 Volts 60Hz 3Phase Motor HP: 3/4 Filter P/N: P031593/P031768 Ov

Brown & Sharpe 24" x 8" x 3" Permanent Magnet Chuck Cat No. 824-7

Walker Ceramax 18" x 6" x 2.75" Permanent Magnetic Chuck M/N: AXM-7729 S/N: 15203

36" x 32" x 34" Steel Work Table Has a little bit of rust on edge, see pics

42" x 26" x 40" Steel Work Table **There was a unit attached to table, the legs of that unit created the rust spots on table**

DoAll 24" x 18" x 2.25" Black Granite Plate, S/N: 1432-0 Accuracy: .0003 **Has a few small chips along edges**

Mazak Adjustable Machine Leveling Pads 5 Total Overall: 10" x 5.5" x 3.5" Quantity Bid: Amount x 5 = Total

Small Cast Iron Machine Leveling Pads, Dims: 4" x 4" x 1/2" 8 Pads Total

Techmalux Lumolux S/218 Florescent Light Fixtures 230V/50Hz/18W Art. Nr. 591-004-001 Overall Length: 36" Quantity Bid: Amount...

Waldmann Industrial Tube Light Fixtures, P/N: SLCV 136 230V 50Hz 1x36W Overall Length: 30" Quantity Bid: Amount x 2 = Total

Kaiser Finish Boring Head, P/N: EWB2-32ExKA5 12mm Capacity 1 DIV = .0002/.00005" DIA

Solid Carbide Shank 1.25" Coolant Thru Boring Bars, P/N: T-25921-15 Shank: 1.25" x 3.5" Quantity Bid: Amount x 2 = Total

Kennametal Coolant Thru 1.25" Grooving Boring Bars, P/N: A20SA4EMR0312N Quantity Bid: Amount x 2 = Total

Kennametal 1.5" Indexable Coolant Thru Boring Bar, P/N: A24-NER3

Kennametal 1.5" Indexable Coolant Thru Boring Bar, P/N: A24-DCLNL4

Kennametal 1.25" Indexable Coolant Thru Boring Bars, P/N: A20-DCLNL4 Quantity Bid: Amount x 2 = Total

Kennametal 1.25" Indexable Coolant Thru Boring Bar, P/N: ??0-DDUNL4 **Cannot read the ?? in p/n**

Kennametal 1" x 1" Indexable Lathe Tool Holders, See Desc for P/N's (1) NSR163C I8KV01 (1) NTJNLS-163 NF5 (1) MWLNL-164 Quanti...

Seco Tapered Indexable Lathe Tool Holder, P/N: CTJNL-16-2 Tapers from 1" to 5/8" across 3.75"

3/4" x 3/4" Indexable Lathe Tool Holders, See Desc for Info (1) MVJNR16-3D (1) MWLNR 12-4B (2) No info

TRW Wendt-Sonis 1" x 1.25" Indexable Lathe Tool Holders P/N: ATD-803253-3989 Quantity Bid: Amount x 2 = Total

1" and 1.25" Indexable Boring Bars (1) 1", T-25921-14B (1) 1.25", T-25921-15 Quantity Bid: Amount x 2 = Total

Morse Taper Adapters

Renishaw MP7 Probe Heads **One unit doesn't have a M/N, assuming both are the same** Quantity Bid: Amount x 2 = Total

New Heule Deburring Tools, See Desc for Info (3) GH-S-D-4120 (1) COFA 12-630-W Quantity Bid: Amount x 4 = Total

New Dihart Rapid Reamer Tools, P/N: 540.56.005

ER16 Collet Chucks, No info on units, Shank: 1" x 4.5" Quantity Bid: Amount x 2 = Total

Emuge KSN1HD SoftSynchro ER20 Collet Chuck Additional Number: F3151H36.1 Shank: 1" x 2"

Kennametal DA180 Collet Chuck, P/N: SS100DA188638 Shank: 1" x 4"

Valenite DA180 Collet Chuck, P/N: VE-1250 Shank: 1.25" x 4.5"

Kennametal LTC Floating Tapping Chuck P/N: ???TCL100 Shank: 1.5" x 4"

1" Indexable Coolant Thru Ball Nose End Mills (1) Seco, PT92494, Shank: 1.25" x 2" (1) No info, Shank: 1" x 2" Quant...

Kennametal 1.75" Indexable Coolant Thru End Mill, P/N: 1570672R0? **Cant read ? in P/N** Shank: 1" x 2"

Misc Carbide Tipped Boring Units, Shanks: 3/4" x 2"

Kennametal Fine Adjustable Twin Wing Boring Bar Coolant Thru Part number is difficult to see Shank: 1.25" x 4.5"

Jacobs No. 3A Drill Chuck, 1/8 - 5/8" Capacity No. 2 Morse Taper Shank

Jacobs No. 34 Ball Bearing Drill Chuck Capacity- 0-1/2" Shank- 1.5" Diameter, 4" length, can be removed

8" Turn Wheels

6" Turn Wheels 1/2" Thru Holes

Trav-A-Dial, Travel Dial Indicator, .001" Resolution

Williams No. 408, 8" Capacity Deep Throat C-Clamp

Large Misc Machine Tie Down Arms, 10 Total

Misc Machine Tie Down Arms, 14 Total

3/4" Diameter Machine Tie Down Rods, Range from 3-18" Length

Machine Tie Down Nuts/Washers/T-Slot Nuts **Fits the rods in lot 1035**

5" Indexable Face Mill, P/N: STP-4125R Arbor: 1.5" Key Ways: 5/8"

Ingersoll Max-I-Cut 3" Indexable Face Mills, P/N: 6A3B03L01 Arbor: 1.25" Key Ways: 1/2" Quantity Bid: Amount x 5 = Total

LoveJoy Tool 7.5" Slotting Cutter, No info on Unit **Missing one insert clamp** Cutter is 2" Thick Thru Hole: 1.5"

New Sandvik Carbide Tipped 17.61mm Coolant Thru Drill P/N: R411.5-1805D*17.61*K20 Shank: 20mm x 50mm

New Sandvik Carbide Tipped 20.5mm Coolant Thru Drill P/N: R411.5-20532D20.50 P20 Shank: 25mm x 45mm

New Sandvik Misc Sized Solid Carbide End Mills, 12 Total Quantity Bid: Amount x 12 = Total

New Sandvik Misc Sized Solid Carbide End Mills, 10 Total Quantity Bid: Amount x 10 = Total

New Sandvik Misc Sized Solid Carbide Coolant Thru Drills, 12 Total Quantity Bid: Amount x 12 = Total

New Sandvik Solid Carbide Drills, 15 Total Quantity Bid: Amount x 15 = Total

New Sandvik Solid Carbide Mill Unit, P/N: R215.94-01500-BC74G 1010 10mm cut

New Sandvik Solid Carbide Mill Unit, P/N: R215.86-03000-AC05G 1620 12mm cut

New Sandvik Solid Carbide Mill Unit, P/N: R215.84-01500-AC43G 1620 10mm cut

New Sandvik 9.525mm Solid Carbide End Mill

New Bassett Solid Carbide .4803" Dia Twist Drills, P/N: 5024C19Q10 Quantity Bid: Amount x 3 = Total

New Walter/Titex 3/8" Coolant Thru Solid Carbide Drills, P/N: A3399XPL Quantity Bid: Amount x 2 = Total

Guhring Solid Carbide 9mm Drills, 10 Total