The Premiere Firearms Auction of the Year.

Blade front and notch rear sights with a twist pattern on the barrel and light engraving on the breech, bolster and tang. The barrel, recoil plate and

Post front sight, with no markings on the barrel. Refaced frizzen with rolled mounted spring and "PATTISON" marked below the fenced flashp...

A) Produced without sights, with the barrel engraved with a leaf pattern around the muzzle and a small crossed scepter proof on the underside with a w

The top barrel flat is marked "WARMINSTER" and the lock is marked "NOYES" ahead of the hammer. The muzzle of the brass barrel me...

Produced circa 1869-1876, this is a rare example of a revolving .41 caliber rifle as manufactured by Roper Sporting Arms Company, Hartford, Connecticu

Manufactured between 1863 and 1865, the Spencer was one of the most popular firearms used by the Union forces in the Civil War. At the same time, the

This is an example of a later production Roper revolving shotgun that was produced at Hartford, Connecticut from 1869 to 1876 by the Roper Sporting Ar

One of approximately 350 produced circa 1850s. Blade front and adjustable sporting rear sights, with the serial number on the underside of the barrel,

Produced circa 1850s, with less than 350 believed to have been made. This is an early produced specimen, made without provisions for a loading lever.

Manufactured by the Springfield Arms Company. Silver blade front and notch rear sights, with a brass tipped Warner type loading lever. Iron frame, wit

Made circa 1849, with total quantity estimated between 50 and 100. The main distinguishing feature is the long hook type cylinder release latch locate

Subject to patent #17382 (Edward Lindner, 26 May 1857), this rifle uses an intricate arrangement of parts to make a multi-shot percussion repeater. Ap

Covered by patent number 182, issued to Daniel Leavitt on 29 April, 1837, the beveled cylinder was designed to direct the flash from the cylinder gap

Made by C.B. Allen for H & C Daniels of Chester, Connecticut, the top of the receiver is equipped with a hinged door that opens to reveal a remo...

Manufactured circa 1835 to 1850, by at least 15 gunsmiths using the Miller patent pill-lock action. It is estimated that only a few hundred were produ

Brass pin front and notch rear sights, with "FINE TWIST" gold inlaid on the flat rib and a pair of well aged silver bands at the breech. S...

Silver blade front and 2-leaf rear sights, with light engraving on the breech and "L. WURZINGER NACHFOLGER/ FRANZ PORISKA IN WIEN" on top ...

The top of the solid concave rib is marked "MACFARLANE, MAKER, NEW YORK." and each lock is marked "MACFARLANE". Damascus barrels...

Single bead sight on a solid rib, with "FR: JUNG U. SOHNE IN SUHL" in gold inlay bordered with silver near the breech, cylinder chokes and...

Single bead sight on a concave rib, with twist steel barrels, cylinder chokes and gold inlaid scrollwork and script writing on each barrel (writer can