3233

Scarce Colt Bisley Model Single Action Revolver in 38 Colt Caliber

Currency:USD Category:Antiques / Firearms & Armory Start Price:3,000.00 USD Estimated At:6,000.00 - 8,000.00 USD
Scarce Colt Bisley Model Single Action Revolver in 38 Colt Caliber
Buyer's Premium is 19.5% by credit card, reduced to 17% if payment is made by cash, check or wire transfer. Contact Rock Island Auction Company to complete your registration with the auction house.
Colt Bisley Model Single Action Revolver manufactured in 1900. The revolver has the Colt commercial blue finish on the barrel, cylinder, trigger guard and back strap. The frame, hammer and loading gate have a casehardened finish. The two-piece, black, hard rubber grips are checkered and embossed with an oval that contains the Rampant Colt trademark. The revolver has the distinctive Bisley Model grips with "humpbacked" profile, special back strap and trigger guard, 3/16-inch higher frame, curved wide spur hammer and long wide trigger. The revolver is one on 412 standard Bisley Models chambered for the .38 Colt cartridge. The top of the barrel is roll-stamped "COLT'S PT. M.F.A. Co. HARTFORD CT. U.S.A." in one line. The left side of the barrel is roll stamped "(BISLEY MODEL) .38 COLT.". The caliber designation "38" is stamped on the underside of the barrel just ahead of the frame. The left side of the frame is roll-stamped with the Colt "Three-Date/Two-Line" patent markings followed by the circled Rampant Colt trademark. The loading gate is stamped with the assembly number "81". A "7" inspection mark is stamped in the hammer well above the firing pin hole. The full serial number is stamped on the bottom of the frame, trigger guard and back strap. The rear face of the cylinder is stamped with the partial serial number "299". All of the visible serial numbers match.
BBL: 7 1/2 inch round
Stock:
Gauge: 38 Colt
Finish: blue/casehardened
Grips: black hard rubber
Serial Number: 194299
Condition: Excellent. The barrel and ejector housing have 95% of the original blue finish with some minor wear at the muzzle on the front edge of the ejector housing. The cylinder has light turn marks with minor handling wear on the front and rear edges and the edge of the chamber flutes. There is moderate finish wear on the grip strap and lighter wear on the back strap and butt. The frame retains 90% plus of the original casehardened finish with vivid case colors. The case colors on the loading gate have started to silver. The hammer has 80% of the casehardened finish with some silvering on the sides and spur. The trigger retains half of the niter blue finish. Nearly all of the niter blue is present on the frame screws. The grips are in fine condition the checkering on the lower portion of the grips shows moderate handling wear and there a notch on the center of the left grip and several shallow dents on the lower edge of the right grip. The markings on the barrel, frame and cylinder are sharp. The action is crisp and functions perfectly. This is an attractive example of a scarce 38 Colt Bisley Model Single Action Revolver.