Rock Island - Premiere Collector's Firearms Auction

Manufactured in 1959. This rifle features a varmint barrel drilled and tapped for a front sight and the barrel and receiver are fitted with scope bloc

Introduced in late 1935 with a 26 inch extra heavy barrel fitted with a globe front sight. Scope blocks on the barrel and receiver and a receiver sigh

This rifle was manufactured in 1941 and has three scope/sight blocks on the barrel, a Lyman base on the receiver, and a trigger shoe. Mounted on a Mar

Manufactured in 1960. Standard Winchester markings including the factory proof on the left side of the heavy barrel and receiver at the breech. Scope

Manufactured in 1957 this is one of 683 Model 70 Target Rifles manufactured in the 243 Winchester caliber. The heavy barrel is tapped for front and re

Manufactured in 1939 with 1,800 produced in this caliber. The barrel is tapped for front and rear sight mounting with the Winchester legend including

Manufactured in 1953. Standard markings including the factory proof on the left side of the barrel and receiver at the breech. Equipped with an Unertl

Manufactured in 1955 with a hooded ramp front and folding leaf rear sights. This rifle has a Bausch and Lomb scope mount and Balvar 8A 2.5-8X scope. M

Manufactured from 1947 to 1961. Standard markings including the factory proof on the left side of the barrel and receiver at the breech. Scope/sight b

Manufactured 1978. Standard Winchester markings with a factory proof and custom shop ("C/CS") proof on top of the heavy barrel. Jeweled fo...

Standard Winchester markings with a factory proof on top of the barrel at the breech and "SUPER EXPRESS" on the floor plate. Hooded ramp f...

Manufactured in 1966. Varmint barrel tapped for front and rear sight mounting and scope blocks mounted on the receiver. Jeweled bolt and high comb pis

Produced 1990-2006. Barrel manufactured without sights, right of the barrel marked "CLASSIC SUPER GRADE", and scope rings attached to the ...

The heavy barrel is tapped for scope/sight mounting. Equipped with a Lyman All-American 10x scope. Jeweled follower and post-64 bolt. Checkered pistol

The barrel is tapped for sight mounting. Equipped with a Tasco 6-18X40 scope with Weaver mounts. Jeweled post-64 bolt and checkered pistol grip stock

Manufactured in Japan, this shotgun features two ivory beads on the matte vent rib, chambered 2 1/2 and 3 inch, choked full/modified with ejectors. Th

Manufactured in 1941. Red front and steel mid bead sights, with "WS1"/"WS2" marked chokes, ejectors and 2 3/4 inch chambers. The...

This model 42 shotgun has a Simmons Gun Specialties vent rib, a single red bead sight, choked "SKEET" and a 3 inch chamber. The Winchester...

Ivory bead front and steel mid-bead sights on the matte vent rib, chambered for 2 3/4 inch shells and full choke. The receiver is engraved with a roun

This was the first slide action shotgun Winchester ever developed exclusively for the .410 bore. This shotgun was manufactured in 1952. Angelo Bee was

Dual white bead sights, with wedges of punch-dot backed scroll engraving at the muzzle and breech, a gold band at the muzzle, 2 3/4 inch chamber and a

Manufactured in 1935 this fine model 21 shotgun features a single nickel bead sight, improved modified/cylinder chokes, ejectors and 2 3/4 inch chambe

Manufactured between 1914 and 1963. Dual ivory bead sights atop matte vent rib barrel with 2 3/4 inch chamber choked marked full. Receiver is blue

Manufactured in 1947. Single bead sight, 2 3/4 inch chamber and choked full. Standard barrel markings with the factory proof on top of the barrel and

Manufactured in 1947. Single bead front sight, 3 inch chamber choked full with standard markings including the factory proof on top of the barrel and

Manufactured in 1906. Single bead sight and choked full, with the top of the barrel having the two line address followed "MODEL 1901. 10 GA&quo...

Manufactured in Belgium, in 1970. The action is engraved with a relief floral vine design with three gold ducks in flight in a marsh scene on the righ

Ramp bead and folding adjustable notch sights, with the address marking on the left side and caliber on the right. Scroll engraved frame, with a gold

Manufactured in 1987. This 3 barrel set consists of a 20, 28, and 410 gauge barrels. All measure 28 inches in length with dual ivory bead sights, skee

Manufactured in Belgium in 1969. This Diana Grade shotgun features dual bead sights on the matte vent rib, chambered for 2 3/4 inch shells, screw-in c

This is 1 of a limited edition of 500 shotguns commemorating the making of the one millionth Citori shotgun in 2008. These shotguns were serial number

Manufactured in 1973 with 32 inch barrels, a single white bead sight, choked full/extra full, with automatic ejectors, chambers are unmarked and measu

Manufactured in Japan with dual ivory bead sights on the high matte vent rib, 3 inch chambers with ejectors and Invector Plus choke system. The barrel

Introduced in 2000 and Manufactured in Japan. Single ivory bead sight on the matte vent rib, chambered for 2 3/4 and 3 inch shells, with ejectors and

Manufactured in 1992 with standard features and markings. Mounted on a matte black, checkered synthetic forearm and pistol grip stock with solid rubbe

Manufactured in Japan. Single bead sight on a matte vent rib, 3 inch chambers and Invector Plus choke system with ejectors. Receiver is blue with flor

Manufactured in Japan with single bead sight on a matte vent rib, 2 3/4 inch chambers and Invector Plus choke system. Standard markings on barrel with

Manufactured in Belgium. Hi-Viz sight on a matte vent rib with adjustable comb. 3 inch chambers with Invector Plus choke tube system. Receiver contain

Manufactured in Japan. Single bead sight on the matte vent rib, 3 inch chambers with ejectors and Invector Plus choke system. Standard Grade IV scroll

Manufactured in Japan with ivory front and mid bead sights on a matte vent rib. 3 inch chambers with Invector Plus choke system, tang mounted safety a

Manufactured in Japan. Dual ivory sights on top of a matte vent rib, with Invector Plus choke tube system, and 3 inch chambers. The receiver has an e

Introduced in 1999. Features a Hi-Viz front sight, stainless steel mid bead sight, 3 inch chamber, and screw-in choke. Mounted on a ribbed synthetic f

Manufactured in Japan. Single bead sight on a vent rib with a 3 inch chamber and Invector Plus choke system. Standard Grade I engraving and mounted wi

Introduced in 1993 and manufactured in Japan. Dual ivory bead sights on a matte high vent rib, chambered for 2 3/4 inch target loads and Invector Chok

Manufactured in Japan. Single bead sight on matte vent rib, 3 inch chambers with extractors, gold washed trigger and tang safety. Receiver, forearm re

One of 100 manufactured in Japan. Single brass bead sight on matted vent rib, 3 inch chambers, Invector chokes, extractors, gold washed trigger and t

Manufactured in Italy. Single ivory bead on the vent rib, chambered for 2 3/4 inch shells with screw in chokes and ejectors. Single selective gold tri

Manufactured in Belgium and assembled in Portugal. Single bead sight on the matte vent rib, 3 inch chamber with Invector choke system. Receiver is fin

Manufactured in Portugal by FN Herstal. Single ivory bead sight on the matte vent rib barrel with 2 3/4 inch chamber. Receiver has bright gold filled

The Premier grade was exclusively the product of the Remington Custom Shop, with masterfully hand-fitted components and superb embellishment. A produc