30

OKK MCH-800 CNC HORIZONTAL MACHINING CENTER

Currency:USD Category:Business & Industrial / Manufacturing & Metalworking Start Price:1.00 USD
OKK MCH-800 CNC HORIZONTAL MACHINING CENTER
Please reference the location of the lot in the "Item Description" tab. Lot locations may vary.

Appointments for inspections are available upon request, 8am-5pm M-F for each location. Please call 616-745-5953 or email sales@btmindustrial.com.



LOCATION: BELOIT, WI
LOADOUT FEE: $2,500.00 (QUOTED BY LOCAL RIGGING COMPANY)

From the Owner:
This is an early 80s cnc horizontal machining center It has a Mitsubishi meldas control. last year we spent $9000 sending the card rack to Mitsubishi having a new memory board put in had a card resoldered and the whole thing cleaned and inspected . The x and z motors were both rebuilt in the last 5 years. It has a 3000 rpm spindle . We saw the tool changer do a tool change when we purchased the machine but never programmed one so we don't know if the tool changer still works. there is an issue with about .09" play in the Z axis. the ball screw is fine there seems to be a spacer missing in the bearing block that allows the screw to move before it moves the nut on the column. we have the back waycover off and have witnessed this but never took the front waycover off to see if the block was loose or what is going on. as long as you back out and continue moving in the same direction the machine is accurate. It has a built in rotary table, I have never used it.I can unlock it and rotate it. It has a chip conveyer the monitor is clear, some of the keys are badly worn, I have another identical control head that goes with it.