1404

Attractive and Desirable Factory Engraved Holland & Holland Side by Side Royal Hammerless Ejector Si

Currency:USD Category:Firearms & Military / Long Guns - Shotguns Start Price:11,000.00 USD Estimated At:22,500.00 - 35,000.00 USD
Attractive and Desirable Factory Engraved Holland & Holland Side by Side Royal Hammerless Ejector Si
Buyer's Premium is 20.5% by credit card, reduced to 18% if payment is made by cash, check or wire transfer. Contact Rock Island Auction Company to complete your registration with the auction house.
Attractive and Desirable Factory Engraved Holland & Holland Side by Side Royal Hammerless Ejector Side Lock Shotgun with Factory Letter, Case and Accessories

This example was manufactured in 1907. There is masterfully executed tight floral scroll engraving on the lock plates, receiver, break lever, trigger guard/lower tang, forearm hardware and on the breech end of the rib. The lock plates are engraved in a banner "HOLLAND & HOLLAND". The underside of the receiver is engraved "ROYAL/HAMMERLESS/EJECTOR". The top of the right barrel is engraved "HOLLAND & HOLLAND" and the top of the left barrel is engraved "98. NEW BOND STREET, LONDON.". The break lever is engraved "PATENT/EJECTOR". The bottom flats of the barrels are stamped with the "arm holding a sword/NP" proofs, the intertwined "Crown/GP" proofs and "Crown/V" proofs. The water table is stamped with a "Crown/V" and a "Crown/GP" proofmark on each side. The matching serial number (25180) is stamped on both sides of the water table, on the bottom of both barrels and on the inside of the forearm hardware. The serial number is also engraved on the lower tang. The barrels have a single brass bead sight, are choked .003/.011 and have 2 3/4 inch chambers with ejectors. The 7 pin lock plates are secured to the receiver with two screws having a niter blue finish. Some of the lock plate pins are niter blue and some are polished bright. There is a gold inlaid cocking indicator on each lock plate. Fitted with double triggers and an automatic tang mounted safety with "SAFE" inlaid in gold. Mounted on a beautifully figured, multi-point checkered English walnut splinter forearm and straight grip stock with teardrop flats, an engraved brass initial oval (MLH) and a leather covered recoil pad. Length of pull is 14 3/4 inches, drop at comb is 1 1/2 inches, drop at heel is 2 1/8 inches and there is an 1/8 inch of cast on. The bores measure .737 for both barrels. The wall thickness for the left is .065 and the wall thickness for the right is .055. The factory letter confirms the gauge, model, barrel length and materials, the chokes, the date the barrels were regulated (1-18-1907), that the stock had a length of "14 3/8 in.", that it was finished on 7-9-1907 and that it weighed 6 pounds and 10 ounces. There is also a copy of the original ledger entry and copies of the regulating entries. Comes with the original leather covered hardcase embossed "MLH" on the lid with green felt interior and gold embossed black leather label on the inside of the lid, two nickel plated snap caps, a nickel plated oiler and a two piece hardwood cleaning rod. Harris Holland started with a wholesale tobacco business, but was a very good shot who frequently won pigeon shoots. His friends convinced him to start a gun business in the 1850s. Harris took his nephew Henry in as an apprentice in 1861 and made him a partner in 1867. Nine years later Harris retired and the name changed to Holland & Holland as we all know it. They have been synonymous with Best Guns ever since 1883 when they entered and won every category of "The Field" magazine trials.

Manufacture: Holland & Holland Ltd
Model: Royal
BBL: 30 inch solid concave rib
Stock: walnut
Gauge: 12
Finish: blue/coin
Grips:
Serial Number: 25180

Extremely fine as period refurbished the barrels retain 95% plus of the rust blue finish with some muzzle and high edge wear along with some scattered minor scratches. The lower tang retains 99% of the blue finish with some minor pin prick pitting under the finish. The trigger guard retains 98% plus of the original blue finish with some edge wear. The break lever and safety retain 75% plus of their original blue finish. Much of the niter blue finish remains on the screw and pin heads. The coin finished components remain bright with only a few minor marks. The engraving on the barrels and lower tang are worn with the remainder of the engraving sharp and crisp. The wood is very fine as reoiled with a few small pieced in repairs (one on the front left of the forearm and one on the bottom left of the wrist), a tight hairline crack on the lower right side of the wrist, some scattered dings, some scattered scratches and the length has been altered. Mechanically excellent. The case is very good with moderate wear. An attractive engraved side lock shotgun by one of the world's renowned manufacturer's Holland & Holland!