SOLD
Winning Bid Undisclosed
This item SOLD at 2026 May 05 @ 19:05UTC-05:00 : EST/CDT
Did you win this lot?
A full invoice should be emailed to the winner by the auctioneer within a day or two.
AV Equipment
Asset ID's: 1627672, 1627673, 1627674, 1627675, 1627676, 1627677
AD: 61980
Auction Location:
6350 Harley Earl Blvd, Warren, Michigan, 48092, United States
Taxes:
| Tax | Rate | Desc. |
| ST |
6% |
Sales Tax |
Buyer's Premiums:
| From (Incl.) | To (Excl.) | Premium |
| 0.00 |
Infinite |
15% |
Additional Fees:
Shipping Details:
NO SHIPPING IS AVAILBLE FOR THIS AUCTION, YOU MUST PICKUP YOUR ITEMS!
Payment Details:
PAYMENT OPTIONS AND PROCEDURES
All correspondence, Wire/ACH transfers, Checks, etc., must have your Paddle Number and reference the sale on which you are bidding. If you do not, we will not know how to apply your payment!
Buyer’s Premium:
- 15% for payments by Wire or Certified Check; or
- 18.5% if using Credit Card or PayPal
BTM requires a credit card on file to verify valid bidders. BTM reserves the right to run your credit card on file if we do not hear from you about your outstanding invoice within 48 hours.
Sales tax is applied to all buyers in the United States. If you have a sales tax exemption ID #, please make sure to enter it when signing up for each auction. If we do not have your form on file, taxes will be added until we receive it.
Please email/call auction house for more information.
For all auction questions including shipping, loading, and handling fees, please contact the Auction Coordinator at auctions.opps@btmindustrial.com.
Buyers may pay by one of the following methods:
Credit Card
- Email: Erin.R@btmindustrial.com to request credit card on file be charged.
- You must have your paddle number and reference the sale on which you are bidding.
PayPal
- Email: Erin.R@btmindustrial.com to request PayPal Invoice.
- You must have your paddle number and reference the sale on which you are bidding.
Certified Bank Check:
Recipient:
BTM Industrial Corporation
ATTN: Carmen VanSuilichem
2051 Harvey Street
Muskegon, MI 49442
- Payment must be sent via USPS priority or UPS ground envelope to ensure prompt delivery
- You must have your paddle number and reference the sale on which you are bidding.
Wire Transfer (No Additional Fee)
Routing number: 044000024
Account number: 01153656708
SWIFT: HUNTUS33
Huntington Bank 2185 3 Mile Rd NW
Grand Rapids, MI 49544
BTM Industrial Corporation
- You must have your paddle number and reference the sale on which you are bidding.
ACH Transfer (No Additional Fee)
Routing number: 072403473
Account number: 01153656708
- You must have your paddle number and reference the sale on which you are bidding.
*NOTE:
If you intend on making your payment by check, cash, or wire transfer, you must let BTM know to remove the 3.5% electronic payment fee. If you have selected your credit card as your method of payment when you signed up, the system defaults to that payment method on every auction. You must email the Auction Coordinator at auctions.opps@btmindustrial.com. If you notice a mistake, simply let us know and we will adjust your invoice and send you a new one.
*NOTE:
It is your responsibility to make sure your payment method is correct, and the buyer’s premium is correct. If we process your payment and you did not tell the Auction Coordinator you wanted a different payment method, no refunds of the 3.5% will be issued.
*NOTE:
If your invoice is two (2) weeks late or more, you will be subject to a 5% invoice total late fee. This applies to pick-up customers as well. If your items are not picked up within two (2) weeks, you will be subject to a late pick-up fee of the same amount.
For any other questions regarding payment and wire transfers, please contact the Auction Coordinator at: auctions.opps@btmindustrial.com.
RETURNS/REFUNDS
The only possibility of returns/refunds are for the following conditions:
1. Damaged shipping upon arrival: original packaging and pictures need to be taken and sent to BTM within 48 hours of receiving your shipment. Full refund of hammer, buyer’s premium, and shipping/handling are eligible for refund if the above terms of notification and pictures are presented within the 48-hour time frame.
2. Items were not accurately listed. Examples: count/quantity, damage of parts not pictured, part numbers are listed incorrectly. BTM needs to be notified within 48 hours of receiving your parts of a problem for the possibility of return. In the event this warrants a return, only the hammer price and buyer’s premium will be eligible for a refund, not shipping/handling. Buyer is responsible for shipping the parts back to BTM. Once parts are received, a refund check will be issued. We do not issue credits on other invoices. Every return situation is different and BTM reserves the right to handle each situation differently based on the facts and situation.
Accepted Payment Methods:
- VISA
- Master Card
- AMEX
- Discover
- Debit
PREVIEW
BTM Industrial (hereinafter “BTM”) attempts to describe the items to the best of our ability based on the information that is given to us by the Consignor and general evaluation and condition of the part(s) (hereinafter “parts”) when we receive them. Please bid accordingly based on the description and pictures of each item. You are buying parts in “As Is” Condition. Some lots may have quantity bids applied to them. See each lot description/bid confirmation.
We highly recommend inspection and previewing lots prior to bidding. Please see all terms below. All buyers have a MAXIMUM of seven (7) days to remove the items from location unless earlier demands of time are stated in the auction description for a specific machine. If items are not picked up within that time frame, then they will be removed and disposed of at buyer’s expense or forfeited. Sale is subject to additions AND deletions.
The following constitutes the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by BTM, and any consignor of such property for whom BTM acts as the agent. BTM strongly recommends to all bidders to first read through these terms, fully understanding the contractual obligations they are entering into by registering and bidding on this sale. BTM also encourages bidders to thoroughly inspect all items before the auction on which they intend to bid.
Under these Terms and Conditions, the term “Bidder,” “High Bidder,” and “Purchaser” shall be used interchangeably and be one of the same.
TERMS AND CONDITION OF SALE
(FCA GM Facility)
1. In consideration of the sale price paid to GM, GM does hereby sell, assign, transfer, and set over to
Buyer all right, title, and interest of GM in and to the personal property identified on Exhibit A
(Property). Delivery of the Property will be determined between GM and the Buyer, this is an estimate
only, and GM shall have no liability to Buyer, or anyone claiming through Buyer, for its failure to deliver
the Property on that date even if due to the negligence of GM or its agents. GM will not be used as a
warehouse. If GM has attempted to release Property in three (3) attempts with no response from the
Buyer, GM will send one last notice advising Buyer to remove Property. If Buyer does not comply, GM
will consider the Property not wanted and proceed with additional opportunities.
2. GM warrants that it is the owner of the Property free and clear of any liens or other encumbrances.
Except for warranty of title, the Property is sold AS IS, WITH ALL FAULTS AND WITHOUT WARRANTIES OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF
MERCHANTABILITY OF FITNESS FOR PARTICULAR PURPOSE AND ANY WARRANTY OF NONINFRINGEMENT OF THE PROPRIETARY RIGHTS OF THIRD PARTIES; GM HEREBY DISCLAIMS AND BUYER
HEREBY WAIVES ANY OBLIGATION, LIABILITY, RIGHT, CLAIM, OR DEMAND IN CONTRACT, TORT
(INCLUDING NEGLIGENCE), STRICT LIABILITY, PATENT INFRINGEMENT, OR OTHERWISE WITH RESPECT
THERETO. Without limiting the generality of the foregoing, Buyer acknowledges and agrees that
General Motors, neither represents nor warrants that the Property will operate satisfactorily in Buyer's
facilities or that any such items comply with any applicable federal, state, or local laws, ordinances,
regulations, or standards, including, but not limited to, regulations and standards promulgated under
federal and state environmental or occupational safety and health laws.
3. Buyer acknowledges that it has been afforded full and complete opportunity to inspect and
investigate, has inspected and investigated the Property, and is purchasing the Property “as is,” based
solely upon its own evaluation of the property.
4. The sale of Property is FCA GM's facility; delivery of the Property takes place, and title and risk of loss
to the Property passes from GM to Buyer, upon the loading of such items on the trucks of the carrier
selected by Buyer. GM shall be responsible for disconnecting, dismantling, and basic shipping
preparation (not to include special requirements such as crating, etc.), and loading of the Property onto
the truck(s) of the carrier selected by purchaser to transport such items. All transportation methods
must be less than 10 years old and in good condition as determined by the local GM facility.
5. GM shall bear the risk of loss of the property until such time as they are delivered to the Buyer;
provided however, in the unlikely event that the property becomes unavailable, lost, damaged or
destroyed by any cause whatsoever (excluding, however, any caused by the acts or omissions of Buyer
or its agents) this Agreement shall terminate with respect to such items. Any purchase price paid will be
returned to the Buyer. GM shall have no other liability to the Buyer with respect to such lost or
damaged property.
6. GENERAL MOTORS, SHALL NOT BE LIABLE TO BUYER FOR ANY INCIDENTAL, SPECIAL,
CONSEQUENTIAL, OR EXEMPLARY DAMAGES ARISING OUT OF ANY ACT OR OMISSION REFERRED TO IN
OR RELATED TO THE PERFORMANCE OF THIS AGREEMENT, OR TO THE USE, OPERATION, OR
MAINTENANCE OF THE PROPERTY BY ANY PERSON, WHETHER OCCASIONED BY BREACH OF CONTRACT,
BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, ENVIRONMENTAL PATENT
7. Buyer, at its sole expense, shall defend, indemnify and hold harmless GM, its officers, directors,
agents, and employees, from all claims, suits, liabilities, damages, and losses (including death, personal
injury and property damage), judgments, obligations, fines, penalties, costs of defending or settling
(including attorney’s fees and court costs) of any kind or character (whether based on breach of
contract, breach of warranty, tort (including strict liability), intellectual property rights or otherwise),
arising out of or related to (a) the breach by Buyer of its obligations under this Agreement, or (b) the
acts or omissions of Buyer, its agents or employees, (c) the transportation, operation, use, handling,
storage, sale, transfer or disposal of the Property, or any products produced from or with the Property
after delivery of the Property to Buyer.
8. Buyer acknowledges that the sale of the Property does not include any sale, transfer, or assignment
of any patents, licenses, or technical information with respect to the Property.
9. Buyer also acknowledges that it is not acquiring any rights in or to any trade names or trademarks of
General Motors, under this Agreement, and agrees not to use any trade name or trademark of General
Motors, in connection with the manufacture, sale, or service of any goods produced with the Property.
Buyer shall conspicuously mark and identify any goods produced by it utilizing the Property as being the
products of Buyer.
10. Buyer also acknowledges that the Property may be subject to federal, state or local environmental
laws or regulations, including, but not limited to CERCLA, RCRA, TSCA and DOT. Buyer represents that
the Property is usable, valuable and that Buyer has an intended use for the Property. If, subsequent to
transfer of title to Buyer, Buyer forms an intent to dispose of any of the Property, Buyer agrees to
conduct any disposal activities in compliance with all laws.
11. Buyer shall comply with all applicable laws, rules, regulations, orders, conventions, ordinances or
standards of the country(ies) of destination or that relate to the manufacture, labeling, transportation,
importation, exportation, licensing, approval or certification of the Property or goods produced with the
Property, but not limited to, those relating to environmental matters, wages, hours and conditions of
employment, subcontractor selection, discrimination, and occupational health/safety. Buyer further
represents that it will not utilize slave, prisoner or any other form of forced or involuntary labor in
connection with the refurbishment or use of the Property or goods produced with the Property. At
GM’s request, Buyer shall certify in writing its compliance with the foregoing.
12. Buyer shall pay any and all sales, use, transfer, filing, and other similar taxes or governmental
charges with respect to the sale or purchase of the Property.
13. The Terms and Conditions of Sale shall be binding upon, and shall inure to the benefit of, the parties
hereto and their respective successors and assigns. This Terms and Conditions of Sale shall be governed
by, and construed in accordance with, the laws of the jurisdiction of the GM plant at which the Property
was located.
14. GM has the right to retract a lot or bid at any time.
15. Export Compliance End-User Certification: The Terms and Conditions of Sale, including the
certification of compliance with export control laws, constitutes the entire agreement between the
parties, and supersedes all prior and contemporaneous agreements and negotiations.
Buyer understands that the equipment, part(s), hardware, software and/or technology purchased from
General Motors are subject to United States export control and sanctions laws, regulations, orders and
requirements, as they may be amended from time to time. As the buyer, you hereby represent and
certify that your organization assumes responsibility for compliance with all U.S. and applicable export
laws and regulations. Furthermore, any equipment, part(s), hardware, software, and/or technology sold
by General Motors will not be, directly or indirectly:
a. Exported, re-exported, released, transferred, sold, supplied, and/or transferred in violation of any
applicable export control law, rule, regulation and/or sanction.
b. Shipped to or transshipped through any country currently under an embargo by the U.S. government
(Cuba, Iran, North Korea, Sudan, Syria and the Crimea region of the Ukraine);
c. Used in the design, development, production, stockpiling, handling, operation, maintenance, or
storage, detection, identification, dissemination, or use of nuclear devices, missiles which includes civil
use rockets, launch vehicles and unmanned air vehicles, or chemical or biological weapons;
d. Transferred or disclosed to any individual or entity identified on a U.S. government restricted party
list; or
e. Exported, re-exported, released, transferred, sold, and/or supplied to any military, paramilitary,
defense and/or security organization and/or used in a vehicle designed for any military, paramilitary, or
governmental security application without your organization first obtaining all required licenses and
approvals.
NOTE: GM WILL NOT BE THE EXPORTER OF RECORD. IF AN EXPORT LICENSE IS REQUIRED, NO SHIPMENT
WILL TAKE PLACE UNTIL A COPY OF SUCH LICENSE HAS BEEN FORWARDED TO GM FOR REVIEW AND
ACCEPTANCE.
The Terms and Conditions of Sale may only be modified, amended, or supplemented by written
amendment executed by authorized representatives of the parties. Failure by either party to enforce
any term or condition herein or to exercise any of its rights hereunder, shall not be construed as
thereafter waiving such terms, conditions or rights. In no event shall any course of dealing, custom or
usage of trade modify, alter or supplement any of the terms or provisions contained herein.
INFRINGEMENT, OR OTHERWISE.