Weekly Tooling/Metalworking Auction 7/5/17

DiHart Rapid Reamer Tools, P/N: 540.13.002 0.4958" - 0.6138" Shank: 5/8" x 2" Quantity Bid: Amount x 9 = Total

Jacobs A0206 Arbor Units, #2 Morse Taper to 6 J.T. Quantity Bid: Amount x 3 = Total

New Morse INT 3/8-18 NPT TPR Pipe Taps Quantity Bid: Amount x 6 = Total

New Emuge Standard Taps, See Desc for Sizes (2) 1/2 - 14 NPSF-X (18) 3/4 - 16 UNF-28X Quantity Bid: Amount x 20 = Total

New Emuge Metric Taps, See Desc for Sizes (3) M10-6H (4) M10-6HX Quantity Bid: Amount x 7 = Total

New Guhring Misc Taps, 7 Total

New North American Standard Taps, .750-16NF HS GH-5 **Some units have shelf wear** Quantity Bid: Amount x 20 = Total

Indexable Thread End Mills, See Desc for Info (1) Kennametal Coolant Thru, K075TM1RW075STN16T, Shank: 3/4" x 2" (1) No info on unit, C...

New Dihart Reaming Tool, P/N: 640.31.005 Reamax -5: 32.001 - 40.000 Anzugsmoment Max. 26Nm, FL.49583

New Dihart Rapid Reamer Tool, P/N: 540.07.005 RS Holder DAH81 30.11 - 40.00 Long

Jacobs No. 32B Drill Chuck Capacity: 0 - 3/8, THD 5/8-16

New Sandvik 1.25" Lathe Tool Holders, P/N: MCT CT-62562-SA7 Quantity Bid: Amount x 4 = Total

New Sandvik Assembly Items, P/N: 5680 065-12 Quantity Bid: Amount x 2 = Total

Lot of Misc Sandvik Items

New Sandvik Boring Heads, See Desc for Info (5) Sandvik L-13395, X002000X011582, 431-100171 L20, S.M.S. B-9194-620 (3) Sandvik L-13394, X002000X01

Misc Sized Drill Masters Carbide Tipped Gun Drills See pics for sizes! Quantity Bid: Amount x 11 = Total

Large Lot of Misc Drill Bits/Units

New Hannibal Coolant Thru Carbide Head Reamers (1) 3420-0241, 10/12 (1) 3420-0242, 10/12 Quantity Bid: Amount x 2 = Total

New Hannibal 1.75" Coolant Thru Carbide Head Reamers Cut: 1.75" Shank: 1.25" x 10" P/N: 3420-0252, 5/13 Quantity Bid: ...

New Hannibal 1-7/8" Coolant Thru Carbide Head Reamers Cut: 1 7/8" Shank: 1.5" x 10" P/N: 3420-0254 **Only 11 pictured,...

New Hannibal 1-3/8" Coolant Thru Carbide Head Reamers Cut: 1 3/8" Shank: 1" x 8.5" P/N: 3420-0245, 5/13 Quantity Bid: ...

New Hannibal 1-3/8" Coolant Thru Carbide Head Reamers Cut: 1 3/8" Shank: 1" x 8.5" P/N's (3) 3420-0246, 4/13 (6) 34...

Greenleaf 2.5" Interchangeable Boring Bar, P/N: PT88856 REV A Head and body have same numbers: 514933 DET1 PT88856 REV A

Large 2.5" Indexable Coolant Thru Drill, LOC: 13" No info on unit

Large Indexable Drills, 6 Total **Each unit is missing at least 1 insert set screw** Quantity Bid: Amount x 6 = Total

Muskegon Tool 2.5" Coolant Thru Indexable Spade Drill?, P/N: CDH-250 Shank: 2" x 4"

Alvan S.C.A.M.I Reamer Unit, P/N: 2500-MC-09968 Shank: 1" x 2" OAL: 18"

Valenite Vari-Set Boring Head Holder, P/N: BB-2D Shank: 1.25" x 10"

MAZAK Coolant Thru Boring Head, P/N: 51288016400 CAT MM

3/8" Capacity Boring Bar Holders, 4 Total

New Ingersoll Coolant Thru Indexable Mill, P/N: YC0770025RHR01 Shank: 5/8" x 1.75"

Graflex EPB Hydraulic 32mm End Mill Holder, P/N: M5832 3632 Shank: 36mm x 40mm

Devlieg Microbore Unit, P/N: SS15-60 Shank: 1.5" x 4"

Large MicroBore Units, All units missing boring head

1.5" Capacity Boring Bar Turret Tool Holders, 4 Total Overall: 4" x 3" x 2.75" Bolt Holes: 1.75" x 3-1/8" Quant...

1" Capacity Lathe Tool Holder, Turret Holders Overall: 4" x 3" x 2" Bolt Holes: 1.75" x 3-1/8" Quantity Bid: A...

Ingersoll 3" and 3.25" Indexable Milling Cutters, See Desc for Info (1) 3" Cut, P/N: 15T4H-3002586R10 (3) 3.25" Cut, P/N: 15...

Ingersoll Max-I-Cut 3" Indexable Face Mills, P/N: 26J1A3081R01 Shank: 1.25" x 2.5" Quantity Bid: Amount x 7 = Total

Ingersoll Max-I-Cut 1.5" Indexable Mill, P/N: 600B15R02 Shank: 1.25" x 2" Quantity Bid: Amount x 5 = Total

Carboloy 1.25" Indexable Mills, P/N: FEM-100 Shank: 1" x 3" Quantity Bid: Amount x 5 = Total

Valenite 2" Indexable Milling Units, P/N: SRN200-4R20-200W Shank: 2" x 3" Quantity Bid: Amount x 5 = Total

Ingersoll Max-I-Pex 2" Ball Nose Indexable End Mills P/N: 16W1B2082R03, P-85306-8 Insert: SPE-33R01, BDE323R05 Shanks: 2" x 3"...

Carboloy 2" Indexable Ball Nose End Mill, P/N: R218.19-02.00-3P-65H Shank: 2" x 3"

Ingersoll 2" Ball Nose Coolant Thru Indexable End Mill P/N: 2BW3Y-20040E4R01 Shank: 2" x 4"

Ingersoll 2.25" Indexable Coolant Thru Drill, P/N: A22505623RS1 Shank: 2" x 4"

Adjustable Coolant Thru Indexable Drills, ~2" **Cutting portion of drill can be adjusted slightly, close to 1.75" to 2" Range** ...

Madison Microller Burnishing Tools, 1" Diameter Shank: #1 Morse Taper Quantity Bid: Amount x 2 = Total

Elliott Tool 4" Roller Burnishing Tool? P/N: 5420-000-81216 Shank: 1" x 3" Quantity Bid: Amount x 2 = Total

Elliott Tool 4" Roller Burnishing Tool? P/N: 5440-000-81217 Shank: 1" x 3"

Bakuer Draw Bar Dead Centers, P/N: CM5 28-50 Quantity Bid: Amount x 2 = Total