Rock Island - Premiere Collector's Firearms Auction

This U.S. Springfield M1C Sniper Rifle is equipped with an M82 Telescopic Sight fitted with a rubber eyepiece and sliding sun shade. The telescopic si

The receiver of this rifle has Remington markings which are covered by the scope mount with the serial number partially visible on the right side and

Manufactured during World War II, this is an example of a Saginaw contract U.S. M1 Carbine. Blade front and two-leaf rear sights, with a Buffalo Armes

Originally manufactured in 1944 with a Winchester barrel, trigger guard, and bolt. Battle Range rear sight with elevation knob and locking bar. The s

Manufactured in 1948. The rear lower left side of the receiver is marked with "U.S." The left side of the barrel at the breech is marked &...

Barrel dated "6-54" with barrel, bolt and elevation drum marked "HRA". Windage drum marked "DRC". The receiver has the...

Manufactured in 1940 with a "7-40" dated Springfield barrel. Standard receiver markings with a "D28287/-1/J6" marked bolt. The r...

The receiver has the "U.S." and an ordnance bomb stamping followed by "MILITARY FINISH" on the left side near the breech with th...

The rifle has a Springfield "3-66" 308 caliber barrel with a Springfield bolt. The rear receiver has standard markings with a hand marked ...

Springfield barrel dated "11-18", standard receiver ring markings, oval ejector port on the left receiver wall, and ladder rear sight. The...

The barrel is dated 12-51 and the rear peep sight has a "HRA-W" marked windage drum. Standard receiver markings with correct "H&R...

This is a representative example of a pre-war (1937) production Colt Service Model Ace that has been refinished with parkerized finish. The right side

Manufactured in 1943. Fixed sights, with the two-line, two-block Colt address and patent markings on the left side of the slide, with the Rampant colt

Manufactured in 1913 on contract by Colt for the U.S. Army. The left side of the slide has the two-line, two-block address and patent dates marking wi

This is a scarce example of a WWI era U.S. Government Model 1911 pistol frame that has been stamped with an "X" prefix replacement serial ...

Manufactured in 1912. Standard two-line, two-block address and patent dates marking with a circled Rampant Colt behind the serrations on the left side

This is a late 1918 U.S. Army contract Model 1911 automatic pistol that has been reworked by Rock Island Arsenal, probably in the post Korea timeframe

Manufactured in 1919 and released to the civilian market from the Anniston Army Depot. Left side of slide has the two line, two block address and pate

Manufactured in 1944, this pistol later passed through the Springfield Armory, where it was armorer upgraded to meet the National Match standards of 1

Manufactured in 1943. Fixed sights, with the left side of the slide marked with the intertwined "USS" company logo and "U.S. & S ...

Manufactured in 1918. Standard two line, two block patent and address markings with the Rampant Colt on the left side of the slide with model marking

Manufactured in 1945. Fixed front and adjustable rear sights, with the 2-line address and patent markings on the left side of the slide next to the Ra

Manufactured in 1943, this pistol later passed through the Springfield Armory, where it was armorer upgraded for use in the national pistol matches. S

Manufactured in 1943. The left side of the slide has the two line Ithaca address with "P" on the top. Left frame has the "FJA" i...

Manufactured in 1918 this is a late WWI production 1911. The two block Colt address and patent markings divided by the Rampant Colt appear on the left

Manufactured in 1914. The left side of the slide has the two line, two block patent dates and Hartford address with a Rampant Colt behind the serratio

Manufactured in 1943. Fixed sights, with the left side of the slide marked "ITHACA GUN CO., INC./ITHACA, N.Y.", and "P" on top, ...

The top of the barrel has the one line Hartford address and the left barrel side is marked "45 COLT". The rear of the cylinder has the par...

The revolver has the K frame with a two inch barrel and six-shot cylinder. It features an anodized blue alloy frame and cylinder with steel barrel. Ca

This is an example of a revolver that was manufactured for the U.S. Army as the Model 1894 and was delivered/inspected in 1896. Standard two line addr

This is an excellent example of a Smith & Wesson Model 1917 U.S. Army revolver, manufactured between 1917 and 1946, featuring fixed sights consi...

Serial no. 215674, 45 ACP cal., 5 1/2 inch round bbl., blue finish, walnut grips. Manufactured in 1919. Fixed front and notch rear sights, with &quo...

1) Flap holster manufactured for Model 1889/95 Colt DA revolver, black leather construction with "USN" deeply imprinted on the flap, thick...

A limited edition carbine of 500 produced by The American Historical Foundation, this being 88 of 500. Features gold plated small parts with remaining

Standard commercial markings along with "U.S. [ordnance bomb]" on the left receiver side and on top of the barrel at breech, "MODEL 1...

This USAAF Type A-2 flight jacket is a size 38 with an AAF winged star insignia stamped under the tag. The back of the jacket features a painted motif

6 1/2 inch double edged blade, with the etched Wilkinson logo on one side of the ricasso and "THE/F-S/FIGHTING/KNIFE" on the reverse. Fitt...

1) Limited Edition framed print, "We've Got Him", 3rd in the series of Lee's Peninsular Campaign. Issued circa 1996, 35 inches tal...

The included Cody letter confirms the serial number, caliber, and 20 inch barrel with the shotgun shipped on October 7, 1899 along with four other Mod

This is a contemporary cutaway demonstration model of an M1 carbine with a "5-43" dated Inland barrel. The adjustable rear peep sight is m...

Battle Range drum rear sight, standard receiver markings and a Springfield "2-43" barrel. Stock has a boxed "SA/FMcF" cartouche ...

Blade front and adjustable peep rear sights, with an undated Winchester barrel, Type II barrel band, flat bolt, milled trigger guard with "lube...

The barrel is dated "8-53" and the rear sight has a "IHC/DRC" marked windage drum. Standard receiver markings with an Internatio...

Patented by John Garand in 1944, but actually used in production starting in 1935, the clip loader device was used to speed up the process of loading

Manufactured in December of 1942, and later refurbished and outfitted in the style of an M1D sniper rifle. Fixed blade front and aperture rear sight w

Manufactured in March of 1944. Blade and flip rear peep sights, with "3-44" dated Inland barrel with a "P" marked top rear, Type...

The barrel is dated "5-55" and the rear sight drum is marked "DRC". Standard receiver markings and "H&R" bolt. The...

Manufactured between 1942 and 1944. This 1st Type high wood Winchester features blade front and flip rear peep sights. Barrel and rear of receiver are

Barrel dated "5-54" with "HRA" marked barrel, bolt and elevation drum. Windage drum is marked "DRC". Mounted on a smoo...

Hooded blade front sight and adjustable Lyman peep sight, with the barrel marked "SA/bomb/8-42" and the standard model markings on the rec...