ESCO Foundry Closure

Includes Pneumaticunit, gas unit, Wands, gauges & hoses plus hand held temperature probe

includes Sartorius precious metal scales

Sand tester/shaker mounted in protective cabinet with spare sieves

With additional probes & test blocks

Includes 4 electro magnetic hand held units, 6 UV lights and a quantity of spares and chargers

3 Bayerischer core hardness testers and 4 laser temperature guns, one suspect.

Includes main unit & calibration unit

Ridsdale Permeability Tester

Includes Sensepoint XCD gas detector system

2 logging units included along with cables

Includes sand elevator, heater unit, control board, hopper and supporting framework

Redford mixer on tracks for mixing sand and hardener/binder

4 in total

Gamma15LL vibratory sand proccessor, 15 tonne through put

Volume 7nm3/min, Refrigerant R22, Working pressure 10kg/cm2

Pnuetech 1000 Ltr Air Receiver Manufactured 2013

Quantity 2

Fitted with rotator chains for turning molds

5,800kg single leg, 4,000kg multi leg

Fitted with rotator chains for turning molds

Spartan 303P Mixer - trough drive 3.0kw, Pump drive 0.43Kw, Shaft speed720Rpm, Output 1-3 t/h

2011 model, Contract no. MF9902, Machine no. 9902 01, with protective frame, hopper stand and control board, trough drive 18.5Kw, Pump drive 0.43Kw, S

Type MDC 34" 230v, Amps cold 16.7, Resistance 13.7, Weight 1,540, Serial no. 11025, NEW

Supplied by Radcomm contains 2 detectors, upright stands, complete unit never been removed from packaging

Roper Keighley Bottom Pour Ladle

Bottom Pour Ladle

Complete with load cells and digital read out scales

3 Baldor Reliance motor drives, 3Hp, 1,750rpm, with right angle drive units attached to drum winches

Model CSC288-45(154), Manufactured 12/2011, capacity 10.7m3/second

Unused this unit has never been installed, 25,000 cfm

Unused this unit has never been installed, 6,000 cfm

Model AFT8-69, Serial no. A3798, Temp in 35c, Temp out 28c, fully Fibreglass

Model AT-19-56, Serial no. 1517 plus bunded water tank

Manufactured 2/93, cooling capacity312k/hr, Water flow 1,040l/min, Serial no. 20080022

Conical Hopper on Stand

Graco President High-flo paint sprayer with Viscon HP heater, mixer & Spray gun

Manufactured by Automated Conveyor systems Serial nos 241371 & 241372, 6m x 700 infeed & 8m x 700 outfeed

Model AD-3030, Serial no. 413, Manufactured 4/2013

1/2 Ton Air Operated Crane on Fixed Frame

Process Thermal Dynamics model EIRO, Serial no. ESC14604, 4.7m long, tunnel 1m wide x 1.440 high

'96" Swing Table and MPF Dust Collector Wheelabrator Serial No: A- 138163 & A-138164 Spares - Filters, Guards, Blades

Furnace Engineering Melbourne equipped with electric sliding bogey, oven 1300 x 1100 x 1000, Max temp 1,050c

Furnace - No 3

Serial no. E50434/7

Operating temp 1150c, Max temp 1,200c

Operating temp 1150c, Max temp 1,200c

45kw Pneutech air compressor installed new 2013 Total hours from 14,339 hours last serviced 11,450

55kw Atlas Copco air compressor Total hours 12,956-  run hours  6,827 last service 6,172

27nm3/min, Manufactured 5/2014, Serial no. PDF-0200-002-0003

JJ Niven Engineering